Introduction
Production Information of Branson, 6640C
The production information of the tractor (6640C) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Branson |
|---|
Dimension and Tires Information of Branson, 6640C
This section sums up the dimension and tires information of the tractor.
| Front tread | 70 to 74.3 inches [177 to 188 cm] |
|---|---|
| Wheelbase | 80 inches [203 cm] |
| Weight | 5825 lbs [2642 kg] |
| Height | 101 inches [256 cm] |
| Length | 142 inches [360 cm] |
| Rear tread | 70 to 74.4 inches [177 to 188 cm] |
| Ground clearance | 15 inches [38 cm] |
| Width | 73 inches [185 cm] |
| Ag front | 12.5/80-18 |
|---|---|
| Industrial front | 12.5/80-18 |
| Lawn/turf rear | LSW570x648 |
| Ag rear | 16.9-28 |
| Industrial rear | 16.9-28 |
| Lawn/turf front | 31x15.50-15 |
Engine Specifications of Branson, 6640C
Get the specifications for the engine and if different options are available.
| Kukje D3400NA |
| Liquid-cooled |
| 4-cylinder |
| Diesel |
| Fuel use | 2.4 gal/hour [9.1 l/hour] |
|---|---|
| Compression | 19.5:1 |
| Displacement | 208 ci [3.4 L] |
| Bore/Stroke | 3.858x4.449 inches [98 x 113 mm] |
| Power | 66 hp [49.2 kW] |
| Pre-heating | Air heater |
| Air cleaner | Dry |
| Starter volts | 12 |
| Starter | Electric |
| Rated RPM | 2600 |
Transmission Information of Branson, 6640CY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Syncro shuttle |
|---|---|
| Gears | 24 forward and reverse |
| Clutch | Dry disc |
Mechanical Specs of Branson, 6640CY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard. |
| Wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of Branson, 6640CY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/670/1000 (1.375) |
Hydraulics Specifications of Branson, 6640C
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 6.9 gpm [26.1 lpm] |
| Mid valves | 2 |
| Pump flow | 11.1 gpm [42.0 lpm] |
Three-Point Hitch of Branson, 6640C
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Position and draft control |
| Rear lift | 4800 lbs [2177 kg] |
Electrical System of Branson, 6640C
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Branson 6640C have?
The Branson 6640C delivers 66 HP.
What years was the Branson 6640C produced?
The Branson 6640C was produced in 2012-2022.
What engine does the Branson 6640C have?
The Branson 6640C is powered by a Diesel, 4-cylinder engine.
What transmission does the Branson 6640C use?
The Branson 6640C uses a Syncro shuttle transmission.
How much does the Branson 6640C weigh?
The Branson 6640C weighs 5825 lbs [2642 kg].
Is the Branson 6640C 4WD?
The Branson 6640C is available in 4WD.