Introduction
Case IH 495 Utility Tractor
The Case IH 495 is a utility tractor produced by Case IH in Doncaster, England, between 1991 and 1994. Designed for general farm operations, it belongs to a series that includes models such as the 3220, 395, 485, and 595.
Engine and Performance
The tractor is powered by the Case IH D-179, a 3-cylinder, liquid-cooled diesel engine with a displacement of 2.9 liters. It provides a gross power output of 53 hp (39.5 kW) and a net power rating of 50 hp (37.3 kW) at a rated engine speed of 2200 RPM.
Transmission and Drivetrain
Multiple transmission configurations were available, including an 8-speed partially synchronized version, a 16-speed partial power shift, an 8-speed synchronized shuttle, and a 16-speed creeper option. These systems allow for a range of forward and reverse speeds to suit various agricultural applications. The tractor is available in either two-wheel drive or four-wheel drive configurations and utilizes a dry disc clutch.
Hydraulics and PTO
The hydraulic system is an open-center design with a pump flow capacity of 15.6 gpm (59.0 lpm) and a fluid capacity of 9 gallons. The rear three-point hitch is of category II/I and provides a lift capacity of 2340 lbs (1061 kg). Power take-off (PTO) is provided via an independent 540 RPM rear shaft.
Dimensions and Chassis
The tractor features a wheelbase of 79.8 inches (202 cm) and is equipped with power steering and hydraulic wet disc brakes. The shipping weight varies by configuration, measuring 5200 lbs (2358 kg) for the 2WD model and 6090 lbs (2762 kg) for the 4WD version. It is standard-fitted with a two-post ROPS for operator safety.
Conclusion
The Case IH 495 is a versatile utility tractor suited for a wide range of agricultural tasks. Its variety of transmission options and robust hydraulic capacity make it a practical choice for farmers requiring a reliable machine in the 50-horsepower class.
Production Information of CaseIH, 495
- Original price was $19,000 in 1994
- Utility tractor
- Built in Doncaster, England
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, 495
| 2WD Clearance (front axle) | 22.1 inches [56 cm] |
|---|---|
| Wheelbase | 79.8 inches [202 cm] |
| 2WD Shipping weight | 5200 lbs [2358 kg] |
| Height (ROPS) | 93.5 inches [237 cm] |
| Length | 136 inches [345 cm] |
| 4WD Clearance (front axle) | 14 inches [35 cm] |
| 4WD Shipping weight | 6090 lbs [2762 kg] |
| Width | 66 inches [167 cm] |
With at minimum tread.
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 14.9-24 |
Engine Specifications of CaseIH, 495
- Case IH D-179
- Liquid-cooled
- Diesel
- 3-cylinder
| Starter volts | 12 |
|---|---|
| Displacement | 179 ci [2.9 L] |
| Power (gross) | 53 hp [39.5 kW] |
| Bore/Stroke | 3.88x5.06 inches [99 x 129 mm] |
| Coolant capacity | 12 qts [11.4 L] |
| Oil capacity | 8.2 qts [7.8 L] |
| Idle RPM | 700-2400 |
| Rated RPM | 2200 |
| Power (net) | 50 hp [37.3 kW] |
Transmission Information of CaseIH, 495
Transmission variants 1
- Four gears with high, low, and reverse ranges. Synchronized shifts within high and low ranges.
| Type | Partially synchronized |
|---|---|
| Oil capacity | 36 qts [34.1 L] |
| Gears | 8 forward and 4 reverse |
| Clutch | Dry disc |
Transmission variants 2
- Four gears with high, low, and reverse ranges. Power shift between direct and lower speed in each gear.
| Type | Partial power shift |
|---|---|
| Gears | 16 forward and 8 reverse |
| Oil capacity | 36 qts [34.1 L] |
Transmission variants 3
- Four gears each in high and low ranges, both forward and reverse.
| Type | Synchronized shuttle |
|---|---|
| Gears | 8 forward and reverse |
| Oil capacity | 36 qts [34.1 L] |
Transmission variants 4
- Four gears with high, low, and reverse ranges plus direct or creeper mode.
| Type | Creeper |
|---|---|
| Gears | 16 forward and 8 reverse |
- 8-speed partially synchronized
- 16-speed creeper
- 16-speed partial power shift
- 8-speed synchronized shuttle
Mechanical Specs of CaseIH, 495
- Two- or four-wheel drive
- Two-post ROPS.
- Power steering
- Hydraulic wet disc brakes
Power Information of CaseIH, 495
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of CaseIH, 495
| Type | Open center |
|---|---|
| Pump flow | 15.6 gpm [59.0 lpm] |
| Capacity | 9 gal [34.1 L] |
| Valves | 1 |
Three-Point Hitch of CaseIH, 495
| Rear Type | II/I |
|---|---|
| Rear lift | 2340 lbs [1061 kg] |
Electrical System of CaseIH, 495
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Where it sits
With 53 HP, the CaseIH 495 sits between 395 (46 HP) and 595 (60 HP) in CaseIH's range. Its power puts it in the 32th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the CaseIH 495 have?
The CaseIH 495 delivers 53 HP.
What years was the CaseIH 495 produced?
The CaseIH 495 was produced in 1991-1994.
What engine does the CaseIH 495 have?
The CaseIH 495 is powered by a Diesel, 3-cylinder engine.
What transmission does the CaseIH 495 use?
The CaseIH 495 uses a Partially synchronized transmission.
How much does the CaseIH 495 weigh?
The CaseIH 495 weighs 5200 lbs [2358 kg].
Is the CaseIH 495 4WD?
The CaseIH 495 is available in 2WD/4WD.