Introduction
Case IH Farmall 55A Utility Tractor
The Case IH Farmall 55A is a compact utility tractor designed for general agricultural applications. Part of the Farmall A series, this model has been in production since 2019 and is engineered to provide reliable performance for varied farm tasks, ranging from light cultivation to transport duties.
Engine and Power
The tractor is powered by a 2.9-liter, 3-cylinder FPT diesel engine. It features a turbocharged and aftercooled induction system coupled with an electronic high-pressure common rail direct injection system. Rated at 54 horsepower (40.3 kW) at 2300 RPM, the engine is designed to meet Tier IV emission standards while maintaining consistent power output.
Transmission and Drivetrain
The Farmall 55A offers flexible transmission configurations to suit specific operational requirements. Operators can choose between a standard 8-speed mechanical shuttle, a 12-speed power shuttle for easier direction changes, or a 20-speed creeper transmission for low-speed tasks. The drivetrain is available in either two-wheel or four-wheel drive, supported by a mechanical rear differential lock and inboard planetary final drives.
Hydraulics and Hitch
The machine utilizes an open-center hydraulic system with a pump flow rate of 12.6 gpm (47.7 lpm). It is equipped with two or three rear valves for implement control. The rear hitch is a Category II/I type, offering position and draft control. The lift capacity at 24 inches behind the lift point is 4,299 lbs (1,950 kg), with optional configurations providing increased capacity up to 6,614 lbs (3,000 kg).
Operator Environment and Dimensions
The tractor comes standard with a two-post folding ROPS, with an optional climate-controlled cab available for improved operator comfort. Maneuverability is facilitated by power steering and wet disc brakes. The 4WD model features an 81.8-inch (207 cm) wheelbase, contributing to an overall length of 151.8 inches (385 cm) and a cab height of 100.2 inches (254 cm).
Conclusion
The Case IH Farmall 55A is a versatile utility tractor suited for small to medium-sized operations. Its combination of multiple transmission choices, Tier IV compliant engine, and flexible hydraulic capacity makes it a capable machine for general field work, loader applications, and implement management.
Production Information of CaseIH, Farmall 55A
- Utility tractor
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, Farmall 55A
- Flange rear axle
| 2WD Wheelbase | 81.2 inches [206 cm] |
|---|---|
| Height (cab) | 100.2 inches [254 cm] |
| 4WD Wheelbase | 81.8 inches [207 cm] |
| Length | 151.8 inches [385 cm] |
| 2WD Standard tires (ag) | Front: 9.5L-15. Rear: 16.9R28 |
|---|---|
| 4WD Standard tires (ag) | Front: 11.2x24. Rear: 16.9x30 |
Engine Specifications of CaseIH, Farmall 55A
- FPT
- Liquid-cooled
- Turbocharged aftercooled diesel
- 3-cylinder
| Starter | Electric |
|---|---|
| Displacement | 178.8 ci [2.9 L] |
| Power | 54 hp [40.3 kW] |
| Bore/Stroke | 4.09x4.53 inches [104 x 115 mm] |
| Starter volts | 12 |
| Rated RPM | 2300 |
| Fuel system | Electronic high-pressure common rail direct injection |
| Emissions | Tier IV |
Transmission Information of CaseIH, Farmall 55A
Transmission variants 1
| Type | Mechanical shuttle |
|---|---|
| Gears | 8 forward and reverse |
Transmission variants 2
| Type | Power shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 3
| Type | Creeper |
|---|---|
| Gears | 20 forward and reverse |
- 8-speed mechanical shuttle
- 12-speed power shuttle
- 20-speed creeper
Mechanical Specs of CaseIH, Farmall 55A
- Two- or four-wheel drive
- Wet disc brakes
- Power steering
- Two-post folding ROPS. Cab optional with air-conditoning.
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of CaseIH, Farmall 55A
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 540E@1592 |
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@1957 |
Hydraulics Specifications of CaseIH, Farmall 55A
| Type | Open center |
|---|---|
| Rear valves | 2 or 3 |
| Pump flow | 12.6 gpm [47.7 lpm] |
Three-Point Hitch of CaseIH, Farmall 55A
| Rear Type | II/I |
|---|---|
| Rear lift (at 24"/610mm) | 4299 lbs [1950 kg] |
| Rear lift (at 24"/610mm)(optional) | 6614 lbs [3000 kg] |
| Control | Position and draft control |
| Control(optional) | 4740 lbs [2150 kg] |
| Rear lift (at ends) | 5952 lbs [2699 kg] |
Electrical System of CaseIH, Farmall 55A
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 120 |
Where it sits
With 54 HP, the CaseIH Farmall 55A sits just below Farmall 65A (64 HP) in CaseIH's range. Its power puts it in the 34th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the CaseIH Farmall 55A have?
The CaseIH Farmall 55A delivers 54 HP.
What years was the CaseIH Farmall 55A produced?
The CaseIH Farmall 55A was produced in 2019+.
What engine does the CaseIH Farmall 55A have?
The CaseIH Farmall 55A is powered by a Turbocharged aftercooled diesel, 3-cylinder engine.
What transmission does the CaseIH Farmall 55A use?
The CaseIH Farmall 55A uses a Mechanical shuttle transmission.
Is the CaseIH Farmall 55A 4WD?
The CaseIH Farmall 55A is available in 2WD/4WD.