Introduction
Production Information of CaseIH, 743 XL
The production information of the tractor (743 XL) includes details about its manufacturing.
| Utility tractor |
| Built in Neuss, Germany |
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, 743 XL
This section sums up the dimension and tires information of the tractor.
| 2WD Wheelbase | 94.1 inches [239 cm] |
|---|---|
| 4WD Length | 156.3 inches [397 cm] |
| 2WD Weight | 7628 lbs [3460 kg] |
| 2WD Length | 153.2 inches [389 cm] |
| 4WD Clearance (front axle) | 14.8 inches [37 cm] |
| 4WD Wheelbase | 92.5 inches [234 cm] |
| Width | 80.7 inches [204 cm] |
| Height (cab) | 104.3 inches [264 cm] |
| 100.1 inches (low cab) [254 cm] | |
| 2WD Clearance (front axle) | 18 inches [45 cm] |
| 4WD Weight | 8289 lbs [3759 kg] |
| Rear tread | 58 to 77.7 inches [147 to 197 cm] |
| Front tread | 62.1 to 71.2 inches [157 to 180 cm (4WD)] |
| Front tread | 52.9 to 73.1 inches [134 to 185 cm (2WD)] |
| Standard tires (ag) | Front: 7.50-16. Rear: 16.9R30 (2WD) |
|---|---|
| Front: 9.5R24. Rear: 16.9R30 (4WD) |
Engine Specifications of CaseIH, 743 XL
Get the specifications for the engine and if different options are available.
| International Harvester D-239 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Oil change | 200 h |
|---|---|
| Fuel system | Direct injection |
| Rated RPM | 2300 |
| Torque RPM | 1600 |
| Torque | 173.3 lb-ft [235.0 Nm] |
| Displacement | 239 ci [3.9 L] |
| Power | 67 hp [50.0 kW] |
| Bore/Stroke | 3.875x5.06 inches [98 x 129 mm] |
| Oil capacity | 9.5 qts [9.0 L] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of CaseIH, 743 XLY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | IH-Total-synchron |
|---|---|
| Gears | 16 forward and 8 reverse |
Transmission variants 2
| Gears | 8 forward and 4 reverse |
|---|
| 16-speed |
| 8-speed |
Mechanical Specs of CaseIH, 743 XLY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Cab standard with heat. |
| Wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of CaseIH, 743 XLY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540 |
|---|---|
| 540/1000 (optional 4WD) |
Hydraulics Specifications of CaseIH, 743 XL
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 2538 psi [175.0 bar] |
|---|---|
| Valves | Up to 3 |
| Pump flow | 8.7 gpm [32.9 lpm] |
Three-Point Hitch of CaseIH, 743 XL
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| 8835 lbs (optional) [4007 kg] | |
| Control | Lower link draft sensing |
| Rear lift | 6947 lbs [3151 kg] |
Electrical System of CaseIH, 743 XL
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 55 |
Frequently asked questions
How much horsepower does the CaseIH 743 XL have?
The CaseIH 743 XL delivers 67 HP.
What years was the CaseIH 743 XL produced?
The CaseIH 743 XL was produced in 1985-1989.
What engine does the CaseIH 743 XL have?
The CaseIH 743 XL is powered by a Diesel, 4-cylinder engine.
What transmission does the CaseIH 743 XL use?
The CaseIH 743 XL uses a IH-Total-synchron transmission.
How much does the CaseIH 743 XL weigh?
The CaseIH 743 XL weighs 7628 lbs [3460 kg].
Is the CaseIH 743 XL 4WD?
The CaseIH 743 XL is available in 2WD/4WD.