
CaseIH 9240
Power
235 hp
Production
1990-1995
Engine
Turbocharged aftercooled diesel, 6-cylinder
Transmission
Full power shift
Weight
28214 lbs (20.8R38 duals) [12797 kg]
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, 9240
The production information of the tractor (9240) includes details about its manufacturing.
| The 9260 and 9240 were the last of the rigid-frame 4WD with four-wheel steering, in the style of the large J.I. Case "crab steer" tractors. |
| Original price was $105,000 in 1995 |
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, 9240
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 124 inches [314 cm] |
|---|---|
| Height (exhaust) | 143.0 inches [363 cm] |
| 151.8 inches (duals) [385 cm] | |
| Length | 250.3 inches [635 cm] |
| Operating weight | 28214 lbs (20.8R38 duals) [12797 kg] |
| Width | 93.5 inches (minimum) [237 cm] |
| Ag front | 18.4-38 |
|---|---|
| Ag rear | 18.4-38 |
Engine Specifications of CaseIH, 9240
Get the specifications for the engine and if different options are available.
| CDC |
| Liquid-cooled |
| Turbocharged aftercooled diesel |
| 6-cylinder |
| Coolant capacity | 29.6 qts [28.0 L] |
|---|---|
| Air cleaner | Dual paper elements |
| Compression | 16.5:1 |
| Torque | 701 lb-ft [950.6 Nm] |
| Rated RPM | 2200 |
| Displacement | 504.5 ci [8.3 L] |
| Power | 235 hp [175.2 kW] |
| Bore/Stroke | 4.488x5.315 inches [114 x 135 mm] |
| Oil capacity | 22 qts [20.8 L] |
| Starter volts | 12 |
| Torque RPM | 1500 |
Transmission Information of CaseIH, 9240Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Full power shift transmission operated with two right-hand levers; one for shifting gears and the other for forward/reverse. Skip-Shift feature allows the transmission to quickly shift from first into higher gears (4th, 6th, 8th). |
| Type | Full power shift |
|---|---|
| Gears | 12 forward and 3 reverse |
| Clutch | Hydraulic wet disc |
Mechanical Specs of CaseIH, 9240Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Cab standard with air-conditioning. Optional deluxe cab adds side and rear window wipers plus internal storage compartments. |
| Integrated hydraulic caliper disc brakes |
| Drive | 4x4 4WD |
|---|---|
| Steering | Four-wheel hydrostatic power |
Power Information of CaseIH, 9240Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent OptOptional |
|---|---|
| Rear PTO Type | 1000 |
| Engine RPM | 1000@2098 |
Hydraulics Specifications of CaseIH, 9240
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Total flow | 28 gpm [106.0 lpm] |
| Valves | 4 |
| Capacity | 18 gal [68.1 L] |
| Pressure | 2500 psi [172.4 bar] |
Three-Point Hitch of CaseIH, 9240
Hitch category and rear/front lift capacity.
| Rear Type | III OptOptional |
|---|---|
| Control | Draft control optional |
| Rear lift | 12750 lbs [5783 kg] |
Electrical System of CaseIH, 9240
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the CaseIH 9240 have?
The CaseIH 9240 delivers 235 HP.
What years was the CaseIH 9240 produced?
The CaseIH 9240 was produced in 1990-1995.
What engine does the CaseIH 9240 have?
The CaseIH 9240 is powered by a Turbocharged aftercooled diesel, 6-cylinder engine.
What transmission does the CaseIH 9240 use?
The CaseIH 9240 uses a Full power shift transmission.
How much does the CaseIH 9240 weigh?
The CaseIH 9240 weighs 28214 lbs (20.8R38 duals) [12797 kg].
Is the CaseIH 9240 4WD?
The CaseIH 9240 is available in 4WD.