CaseIH 9250
Power
300 hp
Production
1990-1995
Engine
Turbocharged aftercooled diesel, 6-cylinder
Transmission
Full power shift
Weight
30,060 lbs (20.8R42 duals) [13635 kg]
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, 9250
The production information of the tractor (9250) includes details about its manufacturing.
| Original price was $116,000 in 1995 |
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, 9250
This section sums up the dimension and tires information of the tractor.
| Front tread | 60 to 130 inches [152 to 330 cm] |
|---|---|
| Wheelbase | 131 inches [332 cm] |
| Height (exhaust) | 143 inches [363 cm] |
| 144.3 inches (duals) [366 cm] | |
| Length | 272.9 inches [693 cm] |
| Rear tread | 60 to 130 inches [152 to 330 cm] |
| Operating weight | 30,060 lbs (20.8R42 duals) [13635 kg] |
| Width | 93.5 inches (minimum) [237 cm] |
| Ag front | 20.8-38 |
|---|---|
| Ag rear | 20.8-38 |
Engine Specifications of CaseIH, 9250
Get the specifications for the engine and if different options are available.
| Cummins LTA-10 |
| Liquid-cooled |
| Turbocharged aftercooled diesel |
| 6-cylinder |
| Coolant capacity | 54 qts [51.1 L] |
|---|---|
| Air cleaner | Dual paper elements |
| Compression | 16.0:1 |
| Torque | 1015 lb-ft [1376.3 Nm] |
| Rated RPM | 2100 |
| Displacement | 611 ci [10.0 L] |
| Power | 300 hp [223.7 kW] |
| Bore/Stroke | 4.921x5.354 inches [125 x 136 mm] |
| Oil capacity | 44 qts [41.6 L] |
| Starter volts | 12 |
| Torque RPM | 1400 |
Transmission Information of CaseIH, 9250Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Full power shift transmission operated with two right-hand levers; one for shifting gears and the other for forward/reverse. Skip-Shift feature allows the transmission to quickly shift from first into higher gears (4th, 6th, 8th). |
| Type | Full power shift |
|---|---|
| Gears | 12 forward and 3 reverse |
| Clutch | Hydraulic wet disc |
Mechanical Specs of CaseIH, 9250Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. Optional deluxe cab adds side and rear window wipers plus internal storage compartments. |
| Integrated hydraulic caliper disc brakes |
| Steering | Hydrostatic power with articulation and front-axle steering |
|---|
Power Information of CaseIH, 9250Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent OptOptional |
|---|---|
| Rear PTO Type | 1000 |
| Engine RPM | 1000@2098 |
Hydraulics Specifications of CaseIH, 9250
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Total flow | 27 gpm [102.2 lpm] |
| Valves | 4 |
| Capacity | 18 gal [68.1 L] |
| Pressure | 2500 psi [172.4 bar] |
Three-Point Hitch of CaseIH, 9250
Hitch category and rear/front lift capacity.
| Rear Type | III OptOptional |
|---|---|
| Control | Draft control optional |
| Rear lift | 12750 lbs [5783 kg] |
Electrical System of CaseIH, 9250
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the CaseIH 9250 have?
The CaseIH 9250 delivers 300 HP.
What years was the CaseIH 9250 produced?
The CaseIH 9250 was produced in 1990-1995.
What engine does the CaseIH 9250 have?
The CaseIH 9250 is powered by a Turbocharged aftercooled diesel, 6-cylinder engine.
What transmission does the CaseIH 9250 use?
The CaseIH 9250 uses a Full power shift transmission.
How much does the CaseIH 9250 weigh?
The CaseIH 9250 weighs 30,060 lbs (20.8R42 duals) [13635 kg].
Is the CaseIH 9250 4WD?
The CaseIH 9250 is available in 4WD.