CaseIH 9260
Power
300 hp
Production
1990-1995
Engine
Turbocharged aftercooled diesel, 6-cylinder
Transmission
Full power shift
Weight
22000 lbs [9979 kg]
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, 9260
The production information of the tractor (9260) includes details about its manufacturing.
| The 9260 and 9240 were the last of the rigid-frame 4WD with four-wheel steering, in the style of the large J.I. Case "crab steer" tractors. |
| Original price was $127,000 in 1995 |
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, 9260
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 124 inches [314 cm] |
|---|---|
| Height (exhaust) | 143.0 inches [363 cm] |
| 151.8 inches (duals) [385 cm] | |
| Length | 250.3 inches [635 cm] |
| Weight | 22000 lbs [9979 kg] |
| Width | 93.5 inches (minimum) [237 cm] |
| Ag front | 20.8-38 |
|---|---|
| Ag rear | 20.8-38 |
Engine Specifications of CaseIH, 9260
Get the specifications for the engine and if different options are available.
| Cummins |
| Liquid-cooled |
| Turbocharged aftercooled diesel |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 611 ci [10.0 L] |
| Rated RPM | 2100 |
| Bore/Stroke | 4.92x5.35 inches [125 x 136 mm] |
| Coolant capacity | 54 qts [51.1 L] |
| Oil capacity | 44 qts [41.6 L] |
| Torque RPM | 1400 |
| Torque | 1015 lb-ft [1376.3 Nm] |
| Power | 300 hp [223.7 kW] |
Transmission Information of CaseIH, 9260Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Full power shift transmission operated with two right-hand levers; one for shifting gears and the other for forward/reverse. Skip-Shift feature allows the transmission to quickly shift from first into higher gears (4th, 6th, 8th). |
| Type | Full power shift |
|---|---|
| Gears | 12 forward and 3 reverse |
| Clutch | Hydraulic wet disc |
Mechanical Specs of CaseIH, 9260Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Cab standard with air-conditioning. Optional deluxe cab adds side and rear window wipers plus internal storage compartments. |
| Drive | 4x4 4WD |
|---|---|
| Steering | Four-wheel hydrostatic power |
Power Information of CaseIH, 9260Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent OptOptional |
|---|---|
| Rear PTO Type | 1000 |
Hydraulics Specifications of CaseIH, 9260
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Total flow | 27 gpm [102.2 lpm] |
| Valves | 4 |
| Capacity | 18 gal [68.1 L] |
| Pressure | 2500 psi [172.4 bar] |
Three-Point Hitch of CaseIH, 9260
Hitch category and rear/front lift capacity.
| Rear Type | III OptOptional |
|---|---|
| Control | Draft control optional |
| Rear lift | 12750 lbs [5783 kg] |
Electrical System of CaseIH, 9260
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the CaseIH 9260 have?
The CaseIH 9260 delivers 300 HP.
What years was the CaseIH 9260 produced?
The CaseIH 9260 was produced in 1990-1995.
What engine does the CaseIH 9260 have?
The CaseIH 9260 is powered by a Turbocharged aftercooled diesel, 6-cylinder engine.
What transmission does the CaseIH 9260 use?
The CaseIH 9260 uses a Full power shift transmission.
How much does the CaseIH 9260 weigh?
The CaseIH 9260 weighs 22000 lbs [9979 kg].
Is the CaseIH 9260 4WD?
The CaseIH 9260 is available in 4WD.