Introduction
Production Information of CaseIH, Farmall 40
The production information of the tractor (Farmall 40) includes details about its manufacturing.
| Built in Dublin, Georgia, USA |
| Compact Utility tractor |
| $36,653 (2011 CVT cab ) | |
| Distributor | CaseIH |
| Original price | $25,677 (2011 shuttle ROPS ) |
| Manufacturer | Shibaura |
| $28,192 (2011 hydro ROPS ) |
Dimension and Tires Information of CaseIH, Farmall 40
This section sums up the dimension and tires information of the tractor.
| Rear tread | 51.2 to 67.4 inches [130 to 171 cm] |
|---|---|
| Wheelbase | 73.5 inches [186 cm] |
| Height (cab) | 90.79 inches [230 cm] |
| Height (ROPS) | 95 inches [241 cm] |
| Length | 125.2 inches [318 cm] |
| Front tread | 49.3 inches [125 cm] |
| Width | 66.6 inches*Minimum width. [169 cm] |
| Industrial front | 10-16.5 |
|---|---|
| Ag front | 8-16 |
| Lawn/turf rear | 44x18-20 |
| 27/12LLx15 | |
| Ag rear | 14.9x24 |
| Industrial rear | 17.5x24 |
| 22.5LLx16.1 | |
| Lawn/turf front | 27x10.50-15 |
Engine Specifications of CaseIH, Farmall 40
Get the specifications for the engine and if different options are available.
| Shibaura N844 |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Air cleaner | Dual stage dry |
|---|---|
| Displacement | 121.7 ci [2.0 L] |
| Pre-heating | Glow plugs |
| Power (gross) | 40 hp [29.8 kW] |
| Starter volts | 12 |
| Rated RPM | 2600 |
Transmission Information of CaseIH, Farmall 40Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Synchro Shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
Transmission variants 3
| The mechanical CVT uses a steel chain between variable-diameter pulleys. Three speed modes (low, medium, high) with variable reactivity. Left-hand shuttle lever. |
| Transmission | CVT |
|---|---|
| Type | Continuously variable transmission |
| Gears | Infinite forward and reverse |
| 12-speed |
| Hydrostatic |
| Continuously variable transmission |
Mechanical Specs of CaseIH, Farmall 40Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Foldable two-post ROPS. Cab optional with air-conditioning. |
| Power steering |
| Wet disc brakes |
Power Information of CaseIH, Farmall 40Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Rear PTO Type | 540 |
| Mid PTO | Optional with hydro/CVT |
Hydraulics Specifications of CaseIH, Farmall 40
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 5.1 gpm [19.3 lpm] |
| Pump flow | 9.8 gpm [37.1 lpm] |
| Total flow | 14.9 gpm [56.4 lpm] |
Three-Point Hitch of CaseIH, Farmall 40
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| 2800 lbs (CVT) [1270 kg] | |
| Control | Position control |
| Rear lift (at 24"/610mm) | 2330 lbs [1056 kg] |
Electrical System of CaseIH, Farmall 40
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| 75 (cab optional) | |
| 55 (cab) | |
| Charging system | Alternator |
| Battery CCA | 600 |
| Charging amps | 40 (ROPS) |
Frequently asked questions
How much horsepower does the CaseIH Farmall 40 have?
The CaseIH Farmall 40 delivers 40 HP.
What years was the CaseIH Farmall 40 produced?
The CaseIH Farmall 40 was produced in 2008-2011.
What engine does the CaseIH Farmall 40 have?
The CaseIH Farmall 40 is powered by a Diesel, 4-cylinder engine.
What transmission does the CaseIH Farmall 40 use?
The CaseIH Farmall 40 uses a Synchro Shuttle transmission.
Is the CaseIH Farmall 40 4WD?
The CaseIH Farmall 40 is available in 4WD.