Introduction
Production Information of CaseIH, Farmall 40C
The production information of the tractor (Farmall 40C) includes details about its manufacturing.
| Compact Utility tractor |
| Manufacturer | CaseIH |
|---|---|
| $37,285 (2016 hydro cab ) | |
| Original price | $30,021 (2016 shuttle ROPS ) |
Dimension and Tires Information of CaseIH, Farmall 40C
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Wheelbase | 73.2 inches [185 cm] |
|---|---|
| Height (cab) | 93.3 inches [236 cm] |
| Height (ROPS) | 98.3 inches [249 cm] |
| Length | 128.1 inches [325 cm] |
| Width | 69.1 inches [175 cm] |
| Standard tires (ag) | Front: 9.5x16. Rear: 13.6-24 |
|---|---|
| Industrial rear | 17.5Lx24 |
| Industrial front | 12x16.5 |
| Lawn/turf front | 28x8.50-15 |
| Lawn/turf rear | 41x14.00-20 |
Engine Specifications of CaseIH, Farmall 40C
Get the specifications for the engine and if different options are available.
| Shibaura N844L-F-30 |
| Liquid-cooled |
| 4-cylinder |
| Diesel |
| Emission control | Diesel particulate filter |
|---|---|
| Air cleaner | Dry element |
| Displacement | 135 ci [2.2 L] |
| Bore/Stroke | 3.307x3.937 inches [84 x 100 mm] |
| Emissions | Tier IV |
| Fuel system | Electronic indirect injection |
| Power | 40.2 hp [30.0 kW] |
| Starter volts | 12 |
| Starter | Electric |
| Rated RPM | 2600 |
Transmission Information of CaseIH, Farmall 40CY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears in four non-synchronized ranges with shuttle shift. |
| Type | Synchronized shuttle |
|---|---|
| Gears | 16 forward and reverse |
Transmission variants 2
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
| 16-speed synchronized shuttle |
| Hydrostatic |
Mechanical Specs of CaseIH, Farmall 40CY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. Cab optional. |
| Power steering |
| Wet disc brakes |
Power Information of CaseIH, Farmall 40CY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of CaseIH, Farmall 40C
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Valves | 1 or 2 |
| Pump flow | 8.2 gpm [31.0 lpm] |
Three-Point Hitch of CaseIH, Farmall 40C
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear Arms | Telescopic link ends |
| Rear lift (at 24"/610mm) | 2469 lbs [1119 kg] |
| Control | Position control |
| Rear lift (at ends) | 2756 lbs [1250 kg] |
Electrical System of CaseIH, Farmall 40C
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 85 |
Frequently asked questions
How much horsepower does the CaseIH Farmall 40C have?
The CaseIH Farmall 40C delivers 40 HP.
What years was the CaseIH Farmall 40C produced?
The CaseIH Farmall 40C was produced in 2014+.
What engine does the CaseIH Farmall 40C have?
The CaseIH Farmall 40C is powered by a Diesel, 4-cylinder engine.
What transmission does the CaseIH Farmall 40C use?
The CaseIH Farmall 40C uses a Synchronized shuttle transmission.
Is the CaseIH Farmall 40C 4WD?
The CaseIH Farmall 40C is available in 4WD.