Introduction
Production Information of CaseIH, Farmall 50
The production information of the tractor (Farmall 50) includes details about its manufacturing.
| The Farmall 50 was originally named the DX50. The Farmall 50 was available in two basic versions. An economy version with ROPS and 12-speed shuttle, and a deluxe version with CVT, cab, higher lift, and optional mid PTO. |
| Built in Dublin, Georgia, USA |
| Compact Utility tractor |
| Distributor | CaseIH |
|---|---|
| Original price | $29,500 (2011 shuttle ROPS ) |
| Manufacturer | Shibaura |
| $40,856 (2011 CVT cab ) |
Dimension and Tires Information of CaseIH, Farmall 50
This section sums up the dimension and tires information of the tractor.
| 4,136 lbs (CVT cab) [1876 kg] | |
| Wheelbase | 73.5 inches [186 cm] |
| Height (cab) | 90.79 inches [230 cm] |
| Height (ROPS) | 95 inches [241 cm] |
| Length | 125.2 inches [318 cm] |
| Clearance (drawbar) | 12.3 inches [31 cm] |
| Shipping weight | 3,522 lbs (ROPS shuttle) [1597 kg] |
| Width | 66.6 inches (min) [169 cm] |
| Rear tread | 51.2 to 67.4 inches [130 to 171 cm] |
| Front tread | 49.3 inches [125 cm] |
| Industrial front | 10-16.5 |
|---|---|
| Ag front | 8-16 |
| Lawn/turf rear | 44x18-20 |
| 27/12LLx15 | |
| Ag rear | 14.9-24 |
| Industrial rear | 17.5x24 |
| 22.5LLx16.1 | |
| Lawn/turf front | 27x10.50-15 |
Engine Specifications of CaseIH, Farmall 50
Get the specifications for the engine and if different options are available.
| Shibaura N844L |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Rated RPM | 2800 |
|---|---|
| Displacement | 135.2 ci [2.2 L] |
| Air cleaner | Dual element |
| Bore/Stroke | 3.307x3.937 inches [84 x 100 mm] |
| Starter volts | 12 |
| Compression | 22.4:1 |
| Pre-heating | Glow plugs |
| Power (gross) | 50 hp [37.3 kW] |
Transmission Information of CaseIH, Farmall 50Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears in three ranges. |
| Transmission | Synchro Shuttle |
|---|---|
| Gears | 12 forward and reverse |
| Clutch | Dry disc |
Transmission variants 2
| The mechanical CVT uses a steel chain between variable-diameter pulleys. Three speed modes (low, medium, high) with variable reactivity. Left-hand shuttle lever. |
| Transmission | CVT |
|---|---|
| Type | Continuously variable transmission |
| Gears | Infinite forward and reverse |
| 12-speed |
| Continuously variable transmission |
Mechanical Specs of CaseIH, Farmall 50Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post foldable ROPS. Cab with air-conditioning standard on CVT-equipped tractor. |
| Wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of CaseIH, Farmall 50Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
| Rear PTO Type | 540 |
| Mid PTO | Optional with CVT |
Hydraulics Specifications of CaseIH, Farmall 50
Hydraulic system type, pressure, pump flow and valves.
| Pump flow | 9.8 gpm [37.1 lpm] |
|---|---|
| Total flow | 14.9 gpm [56.4 lpm] |
| Steering flow | 5.1 gpm [19.3 lpm] |
Three-Point Hitch of CaseIH, Farmall 50
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| 2,800 lbs (CVT) [1270 kg] | |
| Control | Position control |
| Rear lift (at 24"/610mm) | 2,330 lbs [1056 kg] |
Electrical System of CaseIH, Farmall 50
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| 75 (cab optional) | |
| 55 (cab) | |
| Charging system | Alternator |
| Battery CCA | 600 |
| Charging amps | 40 (ROPS) |
Frequently asked questions
How much horsepower does the CaseIH Farmall 50 have?
The CaseIH Farmall 50 delivers 50 HP.
What years was the CaseIH Farmall 50 produced?
The CaseIH Farmall 50 was produced in 2008-2011.
What engine does the CaseIH Farmall 50 have?
The CaseIH Farmall 50 is powered by a Diesel, 4-cylinder engine.
What transmission does the CaseIH Farmall 50 use?
The CaseIH Farmall 50 uses a Synchro Shuttle transmission.
How much does the CaseIH Farmall 50 weigh?
The CaseIH Farmall 50 weighs 3,522 lbs (ROPS shuttle) [1597 kg].
Is the CaseIH Farmall 50 4WD?
The CaseIH Farmall 50 is available in 4WD.