Introduction
Case IH Farmall 50A Utility Tractor
The Case IH Farmall 50A is a utility tractor produced between 2015 and 2025. Manufactured in India, this model is designed to serve as a versatile solution for varied agricultural and maintenance tasks, offering a balance of mechanical simplicity and performance.
Engine and Performance
The tractor is powered by a 2.2-liter, 3-cylinder liquid-cooled diesel engine. It utilizes a turbocharged and aftercooled induction system combined with electronic high-pressure common rail fuel injection. Delivering 50 gross horsepower, the engine operates at a rated speed of 2600 RPM. It complies with Tier IV emission standards and features a compression ratio of 17.5:1, with glow plugs provided for cold-start assistance.
Transmission and Drivetrain
Power is transmitted through a mechanical shuttle transmission featuring 8 forward and 8 reverse gears, arranged in four gears across two ranges. The system includes a 279mm mechanical dry disc clutch. The tractor is available in either two-wheel or four-wheel drive configurations, supported by planetary final drives and a mechanical rear differential lock for enhanced traction.
Hydraulics and PTO
The Farmall 50A employs an open-center hydraulic system. The main pump provides a total flow of 11.9 gpm (45.0 lpm), with a dedicated 5.5 gpm (20.8 lpm) flow for the power steering system. The independent rear PTO operates at 540 RPM, achieved at a rated engine speed of 2575 RPM. A Category II rear three-point hitch provides a lift capacity of 2701 lbs (1225 kg) at 24 inches behind the lift point.
Dimensions and Operator Station
The tractor is equipped with a two-post folding ROPS to ensure operator safety. Weighing approximately 4442 lbs in 2WD configuration and 5060 lbs in 4WD, it offers adjustable tread widths for both front and rear axles to accommodate various row spacings. Braking is managed by wet disc brakes, which are standard across the model range.
Conclusion
The Case IH Farmall 50A is a robust utility tractor suited for small to mid-sized agricultural operations. Its combination of a simple mechanical shuttle transmission, independent PTO, and configurable wheelbase makes it a practical choice for tasks requiring consistent power and maneuverability.
Production Information of CaseIH, Farmall 50A
- Utility tractor
- Built in India
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, Farmall 50A
| 2WD Front tread | 56 to 77.6 inches [142 to 197 cm] |
|---|---|
| 2WD Wheelbase | 96.4 inches [244 cm] |
| Width | 67.5 inches [171 cm] |
| 4WD Length | 134 inches [340 cm] |
| 4WD Wheelbase | 97.6 inches [247 cm] |
| 2WD Weight | 4442 lbs [2014 kg] |
| 2WD Height | 92.7 inches [235 cm] |
| 2WD Length | 129.5 inches [328 cm] |
| Rear tread | 52.6 to 68.4 inches [133 to 173 cm] |
| 4WD Front tread | 61.3 to 69.2 inches [155 to 175 cm] |
| Flange rear axle | 53.9 inch length [1369 mm] |
| 4WD Weight | 5060 lbs [2295 kg] |
| 4WD Height | 97.4 inches [247 cm] |
| 2WD Standard tires (ag) | Front: 7.5x16. Rear: 13.6x28 |
|---|---|
| Industrial rear | 18.4x24 |
| Industrial rear(optional) | Front: 8.3x24. Rear: 13.6x28 |
| Industrial front | 12.5x18 |
Engine Specifications of CaseIH, Farmall 50A
- Liquid-cooled
- Turbocharged aftercooled diesel
- 3-cylinder 6-valve
| Starter volts | 12 |
|---|---|
| Power (gross) | 50 hp [37.3 kW] |
| Fuel system | Electronic high-pressure common rail |
| Pre-heating | Glow plugs |
| Air cleaner | Dry |
| Displacement | 135.9 ci [2.2 L] |
| Emissions | Tier IV |
| Bore/Stroke | 3.70x4.21 inches [94 x 107 mm] |
| Starter | Electric |
| Rated RPM | 2600 |
| Compression | 17.5:1 |
Transmission Information of CaseIH, Farmall 50A
Transmission variants 1
- Four gears in two ranges with shuttle.
| Type | Mechanical shuttle |
|---|---|
| Gears | 8 forward and reverse |
| Clutch | 279mm mechanical dry disc |
Mechanical Specs of CaseIH, Farmall 50A
- Two- or four-wheel drive
- Wet disc brakes
- Power steering
- Two-post folding ROPS.
| Final drives | Planetary |
|---|---|
| Differential lock | Mechanical rear |
Power Information of CaseIH, Farmall 50A
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 540E@2016 |
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@2575 |
Hydraulics Specifications of CaseIH, Farmall 50A
| Type | Open center |
|---|---|
| Steering flow | 5.5 gpm [20.8 lpm] |
| Pump flow | 11.9 gpm [45.0 lpm] |
| Rear valves | 1 or 2 |
| Mid valves | 0 or 2 |
Three-Point Hitch of CaseIH, Farmall 50A
| Rear Type | II |
|---|---|
| Rear lift (at 24"/610mm) | 2701 lbs [1225 kg] |
Electrical System of CaseIH, Farmall 50A
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 75 |
Where it sits
With 50 HP, the CaseIH Farmall 50A sits between Farmall 45A (45 HP) and Farmall 60A (60 HP) in CaseIH's range. Its power puts it in the 33th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the CaseIH Farmall 50A have?
The CaseIH Farmall 50A delivers 50 HP.
What years was the CaseIH Farmall 50A produced?
The CaseIH Farmall 50A was produced in 2015-2025.
What engine does the CaseIH Farmall 50A have?
The CaseIH Farmall 50A is powered by a Turbocharged aftercooled diesel, 3-cylinder 6-valve engine.
What transmission does the CaseIH Farmall 50A use?
The CaseIH Farmall 50A uses a Mechanical shuttle transmission.
How much does the CaseIH Farmall 50A weigh?
The CaseIH Farmall 50A weighs 4442 lbs [2014 kg].
Is the CaseIH Farmall 50A 4WD?
The CaseIH Farmall 50A is available in 2WD/4WD.