Introduction
Case IH Farmall 95 Utility Tractor
The Case IH Farmall 95 is a utility tractor produced between 2008 and 2010. Manufactured by Turk Tractor in Ankara, Turkey, this model was designed to serve as a versatile solution for various agricultural operations, balancing mechanical simplicity with the performance requirements of a mid-range utility machine.
Engine Performance
The tractor is powered by an FPT 4.5-liter, 4-cylinder turbocharged and intercooled diesel engine. It generates a gross power output of 90 hp (67.1 kW) at a rated speed of 2500 RPM. The engine utilizes a direct injection fuel system with a mechanical governor and is compliant with Tier 3 emission standards. Pre-heating is managed via a thermostart system.
Transmission and Drivetrain
The Farmall 95 features a mechanical shuttle transmission. Two configurations are available: a standard 12-speed forward and reverse setup, or a 20-speed version equipped with a creeper gear for low-speed tasks. Directional changes are handled via a left-hand mechanical reverser, which requires the use of the dry disc clutch. The tractor is available in both two-wheel and four-wheel drive variants, assisted by power steering and a mechanical rear differential lock.
Hydraulics and Hitch
The hydraulic system utilizes an open-center design with a total flow capacity of 21.7 gpm (82.1 lpm) at a pressure of 2755 psi (190 bar). For implement control, it offers one to three rear valves. The rear three-point hitch is a Category II type, featuring position control and mechanical lower-link draft sensing, capable of lifting up to 5025 lbs (2279 kg) at 24 inches behind the lift point.
Operator Environment and Dimensions
The tractor is built on a flat-deck platform equipped with a Roll-Over Protective Structure (ROPS), with an enclosed cab available as an optional configuration. The 4WD model has a wheelbase of 92 inches (233 cm), while the 2WD model measures 94 inches (238 cm). Braking is provided by hydraulic wet disc brakes.
Conclusion
The Case IH Farmall 95 provides a functional and robust platform for general agricultural tasks. Its combination of mechanical simplicity, multiple transmission options, and reliable hydraulic capacity makes it suitable for farmers seeking a dependable utility tractor for daily field and farmstead operations.
Production Information of CaseIH, Farmall 95
- Built in Ankara, Turkey
- Utility tractor
| Distributor | CaseIH |
|---|---|
| Manufacturer | Turk Tractor |
Dimension and Tires Information of CaseIH, Farmall 95
| 2WD Wheelbase | 94 inches [238 cm] |
|---|---|
| Height (cab) | 103.1 inches [261 cm] |
| 4WD Wheelbase | 92 inches [233 cm] |
| Height (ROPS) | 101.1 inches [256 cm] |
Engine Specifications of CaseIH, Farmall 95
- FPT
- Liquid-cooled
- 4-cylinder
- Turbocharged intercooled diesel
| Power (gross) | 90 hp [67.1 kW] |
|---|---|
| Pre-heating | Thermostart |
| Displacement | 274 ci [4.5 L] |
| Bore/Stroke | 4.094x5.196 inches [104 x 132 mm] |
| Emissions | Tier 3 |
| Air cleaner | Dual dry elements |
| Fuel system | Direct injection with mechanical governor |
| Starter volts | 12 |
| Starter | Electric |
| Rated RPM | 2500 |
Transmission Information of CaseIH, Farmall 95
Transmission variants 1
- Three ranges with four gears per range. Left-hand reverser requires use of clutch to change directions
| Type | Mechanical shuttle |
|---|---|
| Gears | 12 forward and reverse |
| Clutch | Mechanical dry disc |
Transmission variants 2
| Type | Mechanical shuttle with creeper |
|---|---|
| Gears | 20 forward and 12 reverse |
- 12-speed mechanical shuttle
- 20-speed mechanical shuttle with creeper
Mechanical Specs of CaseIH, Farmall 95
- Two- or four-wheel drive
- Flat deck platform with ROPS. Cab optional.
- Hydraulic wet disc brakes
- Power steering
| Differential lock | Mechanical rear lock |
|---|
Power Information of CaseIH, Farmall 95
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 540/1000 (1.375) |
| Clutch | Mechanical dry clutch |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of CaseIH, Farmall 95
| Type | Open center |
|---|---|
| Total flow | 21.7 gpm [82.1 lpm] |
| Pump flow | 13.6 gpm [51.5 lpm] |
| Pressure | 2755 psi [190.0 bar] |
| Steering flow | 8.1 gpm [30.7 lpm] |
| Rear valves | 1 to 3 |
Three-Point Hitch of CaseIH, Farmall 95
| Rear Type | II |
|---|---|
| Control | Position control and mechanical lower-link draft sensing |
| Rear lift (at 24"/610mm) | 5025 lbs [2279 kg] |
Electrical System of CaseIH, Farmall 95
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 800 |
| Charging system | Alternator |
| Charging amps | 85 |
Where it sits
With 90 HP, the CaseIH Farmall 95 sits between Farmall 90 (84 HP) and JX95 (93 HP) in CaseIH's range. Its power puts it in the 59th percentile of 2000s models in our database (2822 machines).
Frequently asked questions
How much horsepower does the CaseIH Farmall 95 have?
The CaseIH Farmall 95 delivers 90 HP.
What years was the CaseIH Farmall 95 produced?
The CaseIH Farmall 95 was produced in 2008-2010.
What engine does the CaseIH Farmall 95 have?
The CaseIH Farmall 95 is powered by a Turbocharged intercooled diesel, 4-cylinder engine.
What transmission does the CaseIH Farmall 95 use?
The CaseIH Farmall 95 uses a Mechanical shuttle transmission.
Is the CaseIH Farmall 95 4WD?
The CaseIH Farmall 95 is available in 2WD/4WD.