
CaseIH Steiger 485
Power
485 hp
Production
2008-2010
Engine
6-cylinder 24-valve
Transmission
Full power shift
Weight
54,000 lbs [24494 kg]
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, Steiger 485
The production information of the tractor (Steiger 485) includes details about its manufacturing.
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | CaseIH |
|---|---|
| Original price | $291,250 (2010) |
Dimension and Tires Information of CaseIH, Steiger 485
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 154 inches [391 cm] |
|---|---|
| Front axle | 4.5x120 inch diameter [114 mm] |
| Max weight | 54,000 lbs [24494 kg] |
| Width | 44 inches (frame) [111 cm] |
| Rear axle | 4.5x120 inch diameter [114 mm] |
| Shipping weight | 38,500 lbs [17463 kg] |
| Ag front | 710/70R42 |
|---|---|
| Ag rear | 710/70R42 |
Engine Specifications of CaseIH, Steiger 485
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 6-cylinder 24-valve |
| Compression | 16.5:1 |
|---|---|
| Displacement | 786 ci [12.9 L] |
| Oil capacity | 32.8 qts [31.0 L] |
| Power | 485 hp [361.7 kW] |
| Bore/Stroke | 5.315x5.906 inches [135 x 150 mm] |
| Starter volts | 24 |
| Rated RPM | 2000 |
| Air cleaner | Dual paper elements |
| Maximum Power | 534 hp [398.2 kW] |
| Emissions | Tier 3 |
Transmission Information of CaseIH, Steiger 485Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 16 forward and 2 reverse |
Mechanical Specs of CaseIH, Steiger 485Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with heat and A/C, optional Luxury cab |
| Hydraulic wet disc brakes |
| Steering | Hydrostatic power |
|---|
Power Information of CaseIH, Steiger 485Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent optional |
|---|---|
| Rear PTO Type | 1000 |
Hydraulics Specifications of CaseIH, Steiger 485
Hydraulic system type, pressure, pump flow and valves.
| Type | Parallel pressure flow compensated (PFC) |
|---|---|
| 55 gpm (High-Flow) [208.2 lpm] | |
| Total flow | 40 gpm [151.4 lpm] |
| Valves | 4 to 5 |
| 90 gpm (Twin-Flow) [340.7 lpm] | |
| 4 to 9 (without 3-point hitch) |
Three-Point Hitch of CaseIH, Steiger 485
Hitch category and rear/front lift capacity.
| Rear Type | 4N |
|---|---|
| Rear lift (at 24"/610mm) | 19,620 lbs [8899 kg] |
Electrical System of CaseIH, Steiger 485
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 1000 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 175 |
Frequently asked questions
How much horsepower does the CaseIH Steiger 485 have?
The CaseIH Steiger 485 delivers 485 HP.
What years was the CaseIH Steiger 485 produced?
The CaseIH Steiger 485 was produced in 2008-2010.
What engine does the CaseIH Steiger 485 have?
The CaseIH Steiger 485 is powered by a 6-cylinder 24-valve engine.
What transmission does the CaseIH Steiger 485 use?
The CaseIH Steiger 485 uses a Full power shift transmission.
How much does the CaseIH Steiger 485 weigh?
The CaseIH Steiger 485 weighs 54,000 lbs [24494 kg].
Is the CaseIH Steiger 485 4WD?
The CaseIH Steiger 485 is available in 4WD.