CaseIH Steiger 500
Power
500 hp
Production
2011-2023
Engine
Wastegate turbocharged aftercooled diesel, 6-cylinder 24-valve
Transmission
Full power shift
Weight
39,492 lbs (dual 710/70R42) [17913 kg]
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, Steiger 500
The production information of the tractor (Steiger 500) includes details about its manufacturing.
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, Steiger 500
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 154 inches [391 cm] |
|---|---|
| Rear axle | 4.5 by 120 inches [114 by 3048 mm] |
| Weight | 39,492 lbs (dual 710/70R42) [17913 kg] |
| Ballasted weight | 56,000 lbs [25401 kg] |
No data available
Engine Specifications of CaseIH, Steiger 500
Get the specifications for the engine and if different options are available.
| Iveco |
| Liquid-cooled |
| Wastegate turbocharged aftercooled diesel |
| 6-cylinder 24-valve |
| Rated RPM | 2100 |
|---|---|
| Displacement | 787 ci [12.9 L] |
| Emission control | Selective catalytic reduction (SCR) |
| Bore/Stroke | 5.315x5.906 inches [135 x 150 mm] |
| Starter type | Electric |
| Maximum Power | 550 hp [410.1 kW] |
| Power | 500 hp [372.9 kW] |
| Emissions | Interim Tier 4 |
Transmission Information of CaseIH, Steiger 500Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 16 forward and 2 reverse |
| Clutch | Electro-hydraulic wet discs |
Mechanical Specs of CaseIH, Steiger 500Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Surveyor cab standard. |
Power Information of CaseIH, Steiger 500Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1-3/4) |
Hydraulics Specifications of CaseIH, Steiger 500
Hydraulic system type, pressure, pump flow and valves.
| Type | Pressure flow compensating (PFC) |
|---|---|
| 56 gpm (High Flow) [212.0 lpm] | |
| Total flow | 42 gpm [159.0 lpm] |
| Rear valves | 4 to 8 |
| 113 gpm (Twin Flow) [427.7 lpm] | |
| Pump flow | 35 gpm [132.5 lpm] |
Three-Point Hitch of CaseIH, Steiger 500
Hitch category and rear/front lift capacity.
| Rear Type | 4N |
|---|---|
| Rear lift | 19,620 lbs [8899 kg] |
Electrical System of CaseIH, Steiger 500
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 1000 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 200 |
Frequently asked questions
How much horsepower does the CaseIH Steiger 500 have?
The CaseIH Steiger 500 delivers 500 HP.
What years was the CaseIH Steiger 500 produced?
The CaseIH Steiger 500 was produced in 2011-2023.
What engine does the CaseIH Steiger 500 have?
The CaseIH Steiger 500 is powered by a Wastegate turbocharged aftercooled diesel, 6-cylinder 24-valve engine.
What transmission does the CaseIH Steiger 500 use?
The CaseIH Steiger 500 uses a Full power shift transmission.
How much does the CaseIH Steiger 500 weigh?
The CaseIH Steiger 500 weighs 39,492 lbs (dual 710/70R42) [17913 kg].
Is the CaseIH Steiger 500 4WD?
The CaseIH Steiger 500 is available in 4WD.