CaseIH Steiger 500 Quadtrac
Power
500 hp
Production
2011-2023
Engine
Wastegate turbocharged aftercooled diesel, 6-cylinder 24-valve
Transmission
Full power shift
From the same series:
Introduction
Case IH Steiger 500 Quadtrac Articulated Crawler Tractor
The Case IH Steiger 500 Quadtrac is a high-horsepower articulated crawler tractor manufactured between 2011 and 2023 in Fargo, North Dakota, USA. Designed for large-scale agricultural operations, it utilizes a four-track system to optimize traction and reduce ground pressure during heavy-duty fieldwork.
Engine and Powerplant
The tractor is powered by an Iveco 12.9-liter, 6-cylinder, 24-valve diesel engine. It features wastegate turbocharging and aftercooling to maintain efficiency under load. The engine is rated at 500 hp, with a maximum power output of 550 hp at 2100 rated RPM. To comply with environmental standards, the engine utilizes Selective Catalytic Reduction (SCR) technology, meeting Interim Tier 4 emission requirements.
Transmission and Drive
The powertrain includes a full power shift transmission providing 16 forward speeds and 2 reverse speeds, managed by an electro-hydraulic wet disc clutch system. The articulated crawler configuration ensures superior weight distribution and traction across varied terrain compared to traditional wheeled tractors.
Hydraulics and Hitch
The hydraulic system is a closed-center pressure flow compensated (PFC) setup. The standard pump flow provides 35 gpm, with a total system flow of 42 gpm. Higher capacity configurations are available, including a 56 gpm High Flow option and a 113 gpm Twin Flow setup. The rear hitch is a category 4N type with a lift capacity of 19,728 lbs, suitable for heavy implements.
Operator Environment and Electrical
The machine comes standard with the Surveyor cab, designed to provide visibility and comfort for extended operating hours. The electrical system operates on a 12-volt, negative ground architecture, supported by a dual-battery configuration with a combined cold cranking amperage of 1000 CCA and a 200-amp charging system.
Conclusion
The Case IH Steiger 500 Quadtrac is engineered for demanding tasks such as heavy tillage, large-scale planting, and high-capacity hauling. Its combination of high engine output, flexible hydraulic options, and crawler-based drive system makes it a specialized tool for intensive professional farming requirements.
Production Information of CaseIH, Steiger 500 Quadtrac
- Articulated Crawler tractor
- Built in Fargo, North Dakota, USA
| Manufacturer | CaseIH |
|---|
Engine Specifications of CaseIH, Steiger 500 Quadtrac
- Iveco
- Liquid-cooled
- Wastegate turbocharged aftercooled diesel
- 6-cylinder 24-valve
| Rated RPM | 2100 |
|---|---|
| Displacement | 787 ci [12.9 L] |
| Emission control | Selective catalytic reduction (SCR) |
| Bore/Stroke | 5.315x5.906 inches [135 x 150 mm] |
| Maximum Power | 550 hp [410.1 kW] |
| Power | 500 hp [372.9 kW] |
| Emissions | Interim Tier 4 |
Transmission Information of CaseIH, Steiger 500 Quadtrac
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 16 forward and 2 reverse |
| Clutch | Electro-hydraulic wet discs |
Mechanical Specs of CaseIH, Steiger 500 Quadtrac
- Surveyor cab standard.
| Drive | Articulated crawler |
|---|
Power Information of CaseIH, Steiger 500 Quadtrac
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1-3/4) |
Hydraulics Specifications of CaseIH, Steiger 500 Quadtrac
| Type | Closed center pressure flow compensated (PFC) |
|---|---|
| Type(optional) | 56 gpm (High Flow) [212.0 lpm] |
| Total flow | 42 gpm [159.0 lpm] |
| Rear valves | 4 to 8 |
| Rear valves(optional) | 113 gpm (Twin Flow) [427.7 lpm] |
| Pump flow | 35 gpm [132.5 lpm] |
Three-Point Hitch of CaseIH, Steiger 500 Quadtrac
| Rear Type | 4N |
|---|---|
| Rear lift | 19,728 lbs [8948 kg] |
Electrical System of CaseIH, Steiger 500 Quadtrac
| Ground | Negative |
|---|---|
| Battery CCA | 1000 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 200 |
Where it sits
With 500 HP, the CaseIH Steiger 500 Quadtrac sits between Steiger 485QT (485 HP) and Steiger 550 Quadtrac (550 HP) in CaseIH's range. Its power puts it in the 98th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the CaseIH Steiger 500 Quadtrac have?
The CaseIH Steiger 500 Quadtrac delivers 500 HP.
What years was the CaseIH Steiger 500 Quadtrac produced?
The CaseIH Steiger 500 Quadtrac was produced in 2011-2023.
What engine does the CaseIH Steiger 500 Quadtrac have?
The CaseIH Steiger 500 Quadtrac is powered by a Wastegate turbocharged aftercooled diesel, 6-cylinder 24-valve engine.
What transmission does the CaseIH Steiger 500 Quadtrac use?
The CaseIH Steiger 500 Quadtrac uses a Full power shift transmission.