CaseIH Steiger 550
Power
550 hp
Production
2011-2013
Engine
Two-stage turbocharged intercooled and aftercooled diesel, 6-cylinder 24-valve
Transmission
Full power shift
Weight
44,046 lbs (dual 710/70R42) [19979 kg]
Drive
4WD
From the same series:
Introduction
Production Information of CaseIH, Steiger 550
The production information of the tractor (Steiger 550) includes details about its manufacturing.
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | CaseIH |
|---|
Dimension and Tires Information of CaseIH, Steiger 550
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 154 inches [391 cm] |
|---|---|
| Rear axle | 5.5 by 120 inches [139 by 3048 mm] |
| Rear axle | 4.5 by 120 inches [114 by 3048 mm] |
| Weight | 44,046 lbs (dual 710/70R42) [19979 kg] |
| Ballasted weight | 66,000 lbs [29937 kg] |
No data available
Engine Specifications of CaseIH, Steiger 550
Get the specifications for the engine and if different options are available.
| Iveco |
| Liquid-cooled |
| Two-stage turbocharged intercooled and aftercooled diesel |
| 6-cylinder 24-valve |
| Rated RPM | 2100 |
|---|---|
| Displacement | 787 ci [12.9 L] |
| Emission control | Selective catalytic reduction (SCR) |
| Bore/Stroke | 5.315x5.906 inches [135 x 150 mm] |
| Starter type | Electric |
| Maximum Power | 605 hp [451.1 kW] |
| Power | 550 hp [410.1 kW] |
| Emissions | Interim Tier 4 |
Transmission Information of CaseIH, Steiger 550Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 16 forward and 2 reverse |
| Clutch | Electro-hydraulic wet discs |
Mechanical Specs of CaseIH, Steiger 550Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Surveyor cab standard. |
Power Information of CaseIH, Steiger 550Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1-3/4) |
Hydraulics Specifications of CaseIH, Steiger 550
Hydraulic system type, pressure, pump flow and valves.
| Type | Pressure flow compensating (PFC) |
|---|---|
| 56 gpm (High Flow) [212.0 lpm] | |
| Total flow | 42 gpm [159.0 lpm] |
| Rear valves | 4 to 8 |
| 113 gpm (Twin Flow) [427.7 lpm] | |
| Pump flow | 35 gpm [132.5 lpm] |
Three-Point Hitch of CaseIH, Steiger 550
Hitch category and rear/front lift capacity.
| Rear Type | 4N |
|---|---|
| Rear lift | 19,620 lbs [8899 kg] |
Electrical System of CaseIH, Steiger 550
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 1000 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 200 |
Frequently asked questions
How much horsepower does the CaseIH Steiger 550 have?
The CaseIH Steiger 550 delivers 550 HP.
What years was the CaseIH Steiger 550 produced?
The CaseIH Steiger 550 was produced in 2011-2013.
What engine does the CaseIH Steiger 550 have?
The CaseIH Steiger 550 is powered by a Two-stage turbocharged intercooled and aftercooled diesel, 6-cylinder 24-valve engine.
What transmission does the CaseIH Steiger 550 use?
The CaseIH Steiger 550 uses a Full power shift transmission.
How much does the CaseIH Steiger 550 weigh?
The CaseIH Steiger 550 weighs 44,046 lbs (dual 710/70R42) [19979 kg].
Is the CaseIH Steiger 550 4WD?
The CaseIH Steiger 550 is available in 4WD.