CaseIH Steiger 540
Power
535 hp
Production
2014-2023
Engine
Two-stage turbocharged air-to-water intercooled air-to-air aftercooled diesel, 6-cylinder
Transmission
Full power shift
Weight
43855 lbs [19892 kg]
Drive
4WD
From the same series:
Introduction
Case IH Steiger 540: Heavy-Duty Articulated Tractor
The Case IH Steiger 540 is a high-horsepower four-wheel-drive tractor produced between 2014 and 2023 at the Case IH plant in Fargo, North Dakota, USA. Designed for large-scale agricultural operations, this machine focuses on high-capacity draft performance and heavy implement management.
Engine and Powertrain
The tractor is powered by a 12.9-liter, 6-cylinder FPT diesel engine. It features a two-stage turbocharged system with both air-to-water and air-to-air intercooling. The engine delivers a rated power of 535 hp, with a maximum output reaching 605 hp. It utilizes an electronic high-pressure common rail fuel system and Selective Catalytic Reduction (SCR) technology to meet Tier 4 emission standards. Power is delivered through a full power shift transmission providing 16 forward and 2 reverse gears.
Hydraulics and Hitch
Equipped with a pressure flow-compensated hydraulic system, the Steiger 540 offers a standard pump flow of 42 gpm. Operators can configure the tractor with high-flow options, reaching up to 57 gpm or 113 gpm with the TwinFlow setup, supporting between 4 and 8 hydraulic valves. The rear hitch is a Category IVN type, with an optional Category V drawbar available, providing a lift capacity of 19,621 lbs at 24 inches behind the lift point.
Dimensions and Chassis
The Steiger 540 utilizes a hydraulic articulated steering system for maneuverability despite its size. It rides on a 154-inch wheelbase and is typically fitted with 710/70R42 tires. The base weight of the machine is 43,855 lbs, with a maximum operating weight capacity of 56,000 lbs. Final drives consist of inboard planetary units, and the vehicle is equipped with hydraulic wet disc brakes.
Operator Environment
The tractor is equipped with the Surveyor Cab, which comes standard with air conditioning to ensure operator comfort during extended work intervals. Electrical requirements are managed by a 12-volt system powered by two 1000 CCA batteries and a 240-amp charging system.
Conclusion
The Case IH Steiger 540 is engineered for demanding field operations, including deep tillage, large-scale seeding, and heavy pulling tasks. Its combination of high-flow hydraulic options, articulated steering, and substantial ballast capacity makes it a primary tool for professional farming enterprises requiring significant drawbar power.
Production Information of CaseIH, Steiger 540
- Original price was $418,167 in 2015
- Four-wheel Drive (4WD) tractor
- Built in Fargo, North Dakota, USA
| Manufacturer | CaseIH (a part of CNH) |
|---|
Dimension and Tires Information of CaseIH, Steiger 540
| Front axle | Bar: 4.5 by 120 inches [114 by 3048 mm] |
|---|---|
| Wheelbase | 154 inches [391 cm] |
| Weight | 43855 lbs [19892 kg] |
| Height (cab) | 156 inches [396 cm] |
| Length | 300 inches [762 cm] |
| Bar rear axle | 4.5 by 120 inches [114 by 3048 mm] |
| Max weight | 56000 lbs [25401 kg] |
| Width | 120 inches [304 cm] |
At axle ends.
| Ag front | 710/70R42 |
|---|---|
| Ag rear | 710/70R42 |
Engine Specifications of CaseIH, Steiger 540
- FPT
- Liquid-cooled
- Two-stage turbocharged air-to-water intercooled air-to-air aftercooled diesel
- 6-cylinder
| Starter volts | 24 |
|---|---|
| Emission control | Selective catalytic reduction (SCR) |
| Power | 535 hp [398.9 kW] |
| Fuel system | Electronic high pressure common rail |
| Maximum Power | 605 hp [451.1 kW] |
| Displacement | 787 ci [12.9 L] |
| Emissions | Tier 4 |
| Bore/Stroke | 5.31x5.91 inches [135 x 150 mm] |
| Starter | Electric |
| Rated RPM | 2100 |
| Cooling system | Hydraulically-driven fan |
Transmission Information of CaseIH, Steiger 540
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 16 forward and 2 reverse |
Mechanical Specs of CaseIH, Steiger 540
- Surveyor Cab standard with air-conditioning.
- Four-wheel drive
| Brakes | Hydraulic wet disc |
|---|---|
| Final drives | Inboard planetary |
| Trailer brakes(optional) | Hydraulic |
| Steering | Hydraulic articulated |
Power Information of CaseIH, Steiger 540
| Rear PTO | Independent |
|---|---|
| Rear PTO(optional) | 1000@1811 (late) |
| Rear PTO Type | 1000 (1.75) |
| Engine RPM | 1000@1998 (early) |
Hydraulics Specifications of CaseIH, Steiger 540
| Type | Pressure flow compensated |
|---|---|
| Type(optional) | 113 gpm [427.7 lpm] |
| Type(optional) | 57 gpm [215.7 lpm] |
| Valves | 4 to 8 |
| SCV flow | 35 gpm [132.5 lpm] |
| Pump flow | 42 gpm [159.0 lpm] |
TwinFlow option
High Flow option
Three-Point Hitch of CaseIH, Steiger 540
| Rear Type | IVN |
|---|---|
| Rear Type(optional) | Cat. 5 |
| Drawbar | Cat. 4 |
| Rear lift (at 24"/610mm) | 19621 lbs [8900 kg] |
| Rear Arms | Quick coupler |
Electrical System of CaseIH, Steiger 540
| Ground | Negative |
|---|---|
| Battery CCA | 1000 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 240 |
Where it sits
With 535 HP, the CaseIH Steiger 540 sits between Steiger 500 (500 HP) and Steiger 555 (547 HP) in CaseIH's range. Its power puts it in the 99th percentile of 2010s models in our database (2476 machines).
Frequently asked questions
How much horsepower does the CaseIH Steiger 540 have?
The CaseIH Steiger 540 delivers 535 HP.
What years was the CaseIH Steiger 540 produced?
The CaseIH Steiger 540 was produced in 2014-2023.
What engine does the CaseIH Steiger 540 have?
The CaseIH Steiger 540 is powered by a Two-stage turbocharged air-to-water intercooled air-to-air aftercooled diesel, 6-cylinder engine.
What transmission does the CaseIH Steiger 540 use?
The CaseIH Steiger 540 uses a Full power shift transmission.
How much does the CaseIH Steiger 540 weigh?
The CaseIH Steiger 540 weighs 43855 lbs [19892 kg].
Is the CaseIH Steiger 540 4WD?
The CaseIH Steiger 540 is available in 4WD.