Challenger MT565B

Name: Challenger MT565B
Brand: Challenger

Power

168 hp

Production

2004-2011

Engine

Turbocharged diesel, 6-cylinder

Transmission

TechStar CVT

Drive

2WD/4WD

140–200 HP 2000s 2010s

From the same series:

MT555B

Introduction

Challenger MT565B: Powerhouse Performance for Demanding Agriculture!

Get ready to experience unparalleled power and versatility with the Challenger MT565B! This 168 horsepower beast, powered by a robust Caterpillar 3056C engine, is engineered to conquer any agricultural challenge. From its advanced transmission options to its sophisticated hydraulic system, the MT565B is built for efficiency and reliability, making it a top-tier choice for modern farming operations.

Engineered for Power and Efficiency

At the heart of the MT565B lies the formidable Caterpillar 3056C engine, a 6-cylinder turbocharged diesel powerhouse delivering a massive 168 hp. With a displacement of 6.0 L and liquid cooling, this engine is designed for sustained performance under heavy loads. It meets Tier II emissions standards, ensuring environmental responsibility without compromising on power. The dual paper element air cleaner and viscous fan cooling system further contribute to its robust and reliable operation.

Transmission Versatility for Every Task

Adapt to any situation with the MT565B's exceptional transmission choices. Opt for the seamless 'TechStar CVT' for infinite forward and reverse speeds, offering unparalleled control and efficiency. Alternatively, the 'AutoPower IV' partial power shift transmission provides 32 forward and reverse gears, coupled with a four-speed power shift on the left-hand shuttle lever for smooth, on-the-go adjustments. Both options ensure optimal power delivery to match your specific needs.

Hydraulic Muscle for Your Implements

Equipped with a closed center PFC hydraulic system, the MT565B boasts a total flow of 29 gpm, ready to power a wide array of implements. With 4 available valves and a system pressure of 2900 psi, it provides the hydraulic muscle required for the most demanding tasks. The hydraulic system's capacity, at 18.5 gallons for AutoPower and 26.4 gallons for CVT, ensures ample fluid for consistent performance.

Uncompromising Strength and Control

The MT565B ensures superior control and stability with its electro-hydraulic differential locks on both front and rear axles. Its hydrostatic power steering makes maneuvering effortless, even in tight spaces. For braking, rely on the powerful hydraulic wet disc brakes, providing dependable stopping power. With rear lift capacities reaching up to 14,700 lbs (or 13,700 lbs with CVT), this tractor is ready for your heaviest hitches.

Comfortable and Capable Cab

Experience superior comfort in the standard cab, complete with heating and air conditioning. The MT565B offers optional pneumatic cab suspension and automatic climate control, ensuring a pleasant working environment during long hours in the field. With a range of tire options and adjustable tread settings for both front and rear, this tractor can be precisely configured for optimal performance and minimal soil compaction.

Conclusion

"The Challenger MT565B stands out as a highly capable and versatile tractor, blending raw power with advanced technology. Its robust Caterpillar engine, flexible transmission options, and potent hydraulic system make it an ideal partner for any serious agricultural operation. If you're seeking a reliable, powerful, and comfortable tractor that can handle diverse tasks with ease, the MT565B is a compelling choice."

Introduction

Production Information of Challenger, MT565B

The production information of the tractor (MT565B) includes details about its manufacturing.

Row-Crop tractor

Built in Beauvais, France


Manufacturer	Challenger (a part of AGCO)

Dimension and Tires Information of Challenger, MT565B

This section sums up the dimension and tires information of the tractor.


Rear tread	59.2 to 120.5 inches [150 to 306 cm]
2WD Wheelbase	121.4 inches [308 cm]
Height (cab)	112.8 inches [286 cm]
Width	81.1 inches [205 cm]
4WD Wheelbase	118.7 inches [301 cm]
Bar rear axle	3.74 by 98 inches [94 by 2489 mm]
Clearance (drawbar)	15.4 inches [39 cm]
Length	182.3 inches [463 cm]
Rear tread	59.2 to 95.2 inches [150 to 241 cm (short bar)]
4WD Front tread	61.2 to 89.2 inches [155 to 226 cm]
2WD Front tread	64.1 to 83 inches [162 to 210 cm]
Bar rear axle	3.74 by 118 inches [94 by 2997 mm]


Ag front	420/90R30
Ag rear	480/80R42
Ag rear	520/85R42
Ag front	380/85R30

Engine Specifications of Challenger, MT565B

Get the specifications for the engine and if different options are available.

Caterpillar 3056C

Liquid-cooled vertical inline

6-cylinder

Turbocharged diesel


Coolant capacity	26.92 qts [25.5 L]
Oil capacity	20 qts [18.9 L]
Power	168 hp [125.3 kW]
Compression	17.5:1
Air cleaner	Dual paper elements
Displacement	365.2 ci [6.0 L]
Emissions	Tier II
Cooling system	Viscous fan
Bore/Stroke	3.937x5.00 inches [100 x 127 mm]
Starter volts	12
Idle RPM	800-2350
Rated RPM	2200

Transmission Information of Challenger, MT565BY

Discover all variants of transmission available for this tractor model.

Transmission variants 1


Transmission	TechStar CVT
Oil capacity	61.2 qts [57.9 L]
Type	Continuously variable transmission
Gears	Infinite forward and reverse (two-range)

Transmission variants 2

Four synchronized gears (1-4) in two synchronized ranges (low/high) with a four-speed (A-D) power shift on the left-hand power shuttle lever.


Transmission	AutoPower IV
Oil capacity	61.2 qts [57.9 L]
Clutch	Hydraulic wet disc
Type	Partial power shift
Gears	32 forward and reverse

Continuously variable transmission

32-speed partial power shift

Mechanical Specs of Challenger, MT565BY

This section summarizes all mechanical information such as the brake system and other specifications.

Cab standard with heat and A/C. Optional pneumatic cab suspension and automatic climate control.

Two- or four-wheel drive

Hydraulic wet disc brakes


Steering	Hydrostatic power
Final drives	Inboard planetary
Trailer brakes	Hydraulic optional
Differential lock	Electro-hydraulic front and rear

Power Information of Challenger, MT565BY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.


	1000@2000
Rear PTO	Independent
Engine RPM	540@1890
	540/540E/1000 OptOptional
Clutch	Electro-hydraulic wet disc
	540E@1523
Rear PTO Type	540/1000

Hydraulics Specifications of Challenger, MT565B

Hydraulic system type, pressure, pump flow and valves.


Type	Closed center PFC
Valves	4
Pressure	2900 psi [200.0 bar]
Capacity	18.5 gal (AutoPower) [70.0 L]
Total flow	29 gpm [109.8 lpm]
	26.4 gal (CVT) [99.9 L]

Three-Point Hitch of Challenger, MT565B

Hitch category and rear/front lift capacity.


Rear Type	II/III
Front lift (at ends)	5,500 lbs [2494 kg]
Front Hitch	Optional
Rear lift (at 24"/610mm)	14,700 lbs [6667 kg]
	7,700 lbs (optional) [3492 kg]
	13,700 lbs (CVT) [6214 kg]

Electrical System of Challenger, MT565B

Battery voltage, charging system and ground.


Ground	Negative
Battery CCA	420
Batteries	2
Charging system	Alternator
Battery volts	12
Charging amps	120

Frequently asked questions

How much horsepower does the Challenger MT565B have?

The Challenger MT565B delivers 168 HP.

What years was the Challenger MT565B produced?

The Challenger MT565B was produced in 2004-2011.

What engine does the Challenger MT565B have?

The Challenger MT565B is powered by a Turbocharged diesel, 6-cylinder engine.

What transmission does the Challenger MT565B use?

The Challenger MT565B uses a TechStar CVT transmission.

Is the Challenger MT565B 4WD?

The Challenger MT565B is available in 2WD/4WD.

More Challenger models

MT555D170 HP · 2012 - 2014 MT555E170 HP · 2015 - 2020 MT545D165 HP · 2013 - 2014 MT545E165 HP · 2015 - 2020 MT565161 HP · 2002 - 2003 MT635177 HP · 2002 - 2003 MT565D180 HP · 2012 - 2014 MT555B153 HP · 2004 - 2011

View all 164 Challenger models →

Compare the Challenger MT565B with another model

Popular comparisons

vs Massey Ferguson 6490 vs Massey Ferguson 7490 vs Kubota M7-171 vs White 4-150 vs JCB Fastrac 155 vs JCB Fastrac 3155