
Challenger MT835C
Power
410 hp
Production
2009-2013
Engine
Turbocharged aftercooled diesel, 6-cylinder 24-valve
Transmission
Caterpillar Powershift
From the same series:
Introduction
Production Information of Challenger, MT835C
The production information of the tractor (MT835C) includes details about its manufacturing.
| Original price was $381,898 in 2013 |
| Agricultural Crawler tractor |
| Built in Jackson, Minnesota, USA |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT835C
This section sums up the dimension and tires information of the tractor.
No data available
No data available
Engine Specifications of Challenger, MT835C
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Turbocharged aftercooled diesel |
| 6-cylinder 24-valve |
| Starter | Electric |
|---|---|
| Displacement | 923 ci [15.1 L] |
| Power (gross) | 410 hp [305.7 kW] |
| Bore/Stroke | 5.4x6.75 inches [137 x 171 mm] |
| Starter volts | 12 |
| Rated RPM | 2100 |
| Fuel system | Mechanical electric injector unit (MEUI) |
| Emissions | Tier III |
Transmission Information of Challenger, MT835CY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Caterpillar Powershift |
|---|---|
| Clutch | Hydraulic wet discs |
| Type | Full power shift |
| Gears | 16 forward and 4 reverse |
Mechanical Specs of Challenger, MT835CY
This section summarizes all mechanical information such as the brake system and other specifications.
| Cab standard with air-conditioning. |
| Hydraulic wet discs brakes |
| Drive | Crawler |
|---|---|
| Trailer brakes | Hydraulic OptOptional |
| Steering | Speed sensitive differential |
Power Information of Challenger, MT835CY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1.75) |
Hydraulics Specifications of Challenger, MT835C
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center pressure-flow compensated |
|---|---|
| Total flow | 43.5 gpm [164.6 lpm] |
| SCV flow | 36 gpm [136.3 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| 59 gpmOptOptional [223.3 lpm] | |
| Valves | 4 to 6 |
Three-Point Hitch of Challenger, MT835C
Hitch category and rear/front lift capacity.
| Rear Type | III/IVN |
|---|---|
| IV | |
| Rear lift | 19500 lbs [8845 kg] |
Electrical System of Challenger, MT835C
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 1000 |
| Batteries | 4 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 185 |
Frequently asked questions
How much horsepower does the Challenger MT835C have?
The Challenger MT835C delivers 410 HP.
What years was the Challenger MT835C produced?
The Challenger MT835C was produced in 2009-2013.
What engine does the Challenger MT835C have?
The Challenger MT835C is powered by a Turbocharged aftercooled diesel, 6-cylinder 24-valve engine.
What transmission does the Challenger MT835C use?
The Challenger MT835C uses a Caterpillar Powershift transmission.