Challenger 1042
Power
435 hp
Production
2017-2021
Engine
Variable-geometry turbocharger diesel, 6-cylinder
Transmission
Accu-VT
Weight
50706 lbs [23000 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Challenger, 1042
The production information of the tractor (1042) includes details about its manufacturing.
| Original price was $441,666 in 2019 |
| Row-Crop tractor |
| Built in Marktoberdoft, Germany |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, 1042
This section sums up the dimension and tires information of the tractor.
| Bar rear axle | 98.4 inch length [2499 mm] |
|---|---|
| Wheelbase | 130 inches [330 cm] |
| Max weight | 50706 lbs [23000 kg] |
| Shipping weight | 32734 lbs [14848 kg] |
| Length | 242 inches [614 cm] |
| Bar rear axle | 118.1 inch length [2999 mm] |
| Width | 118.2 inches [300 cm] |
| Front: 320/90R42. Rear: 480/80R50 (duals) | |
| Standard tires (ag) | Front: 420/85R38. Rear: 420/85R38 |
| Front: 710/60R38. Rear: 900/65R46 | |
| Front: 710/75R42. Rear: | |
| Optional tires (ag) | Front: 650/65R38. Rear: 750/75R46 |
| Front: 380/85R46. Rear: 480/95R50 (duals) | |
| Front: 650/65R34. Rear: |
Engine Specifications of Challenger, 1042
Get the specifications for the engine and if different options are available.
| MAN |
| Liquid-cooled |
| 6-cylinder |
| Variable-geometry turbocharger diesel |
| Emission control | Selective catalytic reduction |
|---|---|
| Torque | 1549 lb-ft [2100.4 Nm] |
| Displacement | 756.7 ci [12.4 L] |
| Bore/Stroke | 4.96x6.54 inches [126 x 166 mm] |
| Emissions | Tier IV |
| Rated RPM | 1700 |
| Rated Power (gross) | 435 hp [324.4 kW] |
| Starter volts | 24 |
| Starter | Electric |
| Torque RPM | 1450 |
Transmission Information of Challenger, 1042Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Accu-VT |
|---|---|
| Type | Continuously-variable transmission |
| Gears | Infinite forward and reverse |
Mechanical Specs of Challenger, 1042Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. Auto-Guide; AccuField Command; AgControl |
| Power steering |
| Hydraulic wet disc brakes |
Power Information of Challenger, 1042Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000/1000E |
Hydraulics Specifications of Challenger, 1042
Hydraulic system type, pressure, pump flow and valves.
| Type | Load-sensing |
|---|---|
| 113.5 gpm*Optional, with additional 55.5GPM pump. [429.6 lpm] | |
| Valves | Up to 6 |
| Pump flow | 58 gpm [219.5 lpm] |
Three-Point Hitch of Challenger, 1042
Hitch category and rear/front lift capacity.
| Rear Type | IV/IVN |
|---|---|
| Rear lift (at ends) | 18631 lbs [8451 kg] |
Electrical System of Challenger, 1042
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Batteries | 2 |
| Charging system | Alternator |
| Charging amps | 320 *Two 160A alternators. |
Frequently asked questions
How much horsepower does the Challenger 1042 have?
The Challenger 1042 delivers 435 HP.
What years was the Challenger 1042 produced?
The Challenger 1042 was produced in 2017-2021.
What engine does the Challenger 1042 have?
The Challenger 1042 is powered by a Variable-geometry turbocharger diesel, 6-cylinder engine.
What transmission does the Challenger 1042 use?
The Challenger 1042 uses a Accu-VT transmission.
How much does the Challenger 1042 weigh?
The Challenger 1042 weighs 50706 lbs [23000 kg].
Is the Challenger 1042 4WD?
The Challenger 1042 is available in 4WD.