Challenger MT945C
Power
440 hp
Production
2009-2014
Engine
Turbocharged aftercooled diesel, 6-cylinder 24-valve
Transmission
Caterpillar Powershift
Weight
39,266 lbs [17811 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Challenger, MT945C
The production information of the tractor (MT945C) includes details about its manufacturing.
| Original price was $287,145 in 2009 |
| Four-wheel Drive (4WD) tractor |
| Built in Jackson, Minnesota, USA |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT945C
This section sums up the dimension and tires information of the tractor.
| Front axle | Bar: 5.7 by 118 inches [144 by 2997 mm] |
|---|---|
| Wheelbase | 155.5 inches [394 cm] |
| Shipping weight | 39,266 lbs [17811 kg] |
| Height (cab) | 151 inches [383 cm] |
| Length | 298 inches [756 cm] |
| Bar rear axle | 5.7 by 118 inches [144 by 2997 mm] |
| Max weight | 50000 lbs [22680 kg] |
| Width | 192 inches [487 cm] |
| Ag front | 710/70R42 |
|---|---|
| 650/85R38 | |
| 480/80R46 | |
| Ag front | 800/70R38 |
| 620/70R46 | |
| Ag rear | 710/70R42 |
| 620/70R46 | |
| 520/85R46 | |
| 520/85R42 | |
| 650/85R38 | |
| Ag rear | 800/70R38 |
| 480/80R46 | |
| 520/85R42 | |
| 520/85R46 |
Engine Specifications of Challenger, MT945C
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Turbocharged aftercooled diesel |
| 6-cylinder 24-valve |
| Starter volts | 12 |
|---|---|
| Displacement | 923 ci [15.1 L] |
| Power | 440 hp [328.1 kW] |
| Bore/Stroke | 5.4x6.75 inches [137 x 171 mm] |
| Starter | Electric |
| Rated RPM | 2100 |
| Emissions | Tier III |
Transmission Information of Challenger, MT945CY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Caterpillar Powershift |
|---|---|
| Type | Full power shift |
| Gears | 16 forward and 4 reverse |
Mechanical Specs of Challenger, MT945CY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. |
| Articulated power steering |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Electro-hydraulic front and rear optional |
Power Information of Challenger, MT945CY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1.75) |
Hydraulics Specifications of Challenger, MT945C
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center pressure-flow compensated |
|---|---|
| Total flow | 43.5 gpm [164.6 lpm] |
| Pump flow | 36 gpm [136.3 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| 59 gpmOptOptional [223.3 lpm] | |
| Valves | 4 to 6 |
Three-Point Hitch of Challenger, MT945C
Hitch category and rear/front lift capacity.
| Rear Type | III/IVN |
|---|---|
| IV | |
| Rear lift | 19,500 lbs [8845 kg] |
Electrical System of Challenger, MT945C
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 1000 |
| Batteries | 4 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 185 |
Frequently asked questions
How much horsepower does the Challenger MT945C have?
The Challenger MT945C delivers 440 HP.
What years was the Challenger MT945C produced?
The Challenger MT945C was produced in 2009-2014.
What engine does the Challenger MT945C have?
The Challenger MT945C is powered by a Turbocharged aftercooled diesel, 6-cylinder 24-valve engine.
What transmission does the Challenger MT945C use?
The Challenger MT945C uses a Caterpillar Powershift transmission.
How much does the Challenger MT945C weigh?
The Challenger MT945C weighs 39,266 lbs [17811 kg].
Is the Challenger MT945C 4WD?
The Challenger MT945C is available in 4WD.