Challenger MT875E
Power
590 hp
Production
2014-2020
Engine
Turbocharged diesel, 12-cylinder 48-valve
Transmission
Caterpillar
From the same series:
Introduction
Production Information of Challenger, MT875E
The production information of the tractor (MT875E) includes details about its manufacturing.
| Agricultural Crawler tractor |
| Built in Jackson, Minnesota, USA |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT875E
This section sums up the dimension and tires information of the tractor.
No data available
No data available
Engine Specifications of Challenger, MT875E
Get the specifications for the engine and if different options are available.
| AGCO Power |
| Liquid-cooled |
| 12-cylinder 48-valve |
| Turbocharged diesel |
| Emission control | Selective catalytic reduction (SCR) |
|---|---|
| Torque | 2095 lb-ft [2840.8 Nm] |
| Displacement | 1027.5 ci [16.8 L] |
| Bore/Stroke | 4.370x5.709 inches [111 x 145 mm] |
| Emissions | Tier IV |
| Maximum Power | 637 hp [475.0 kW] |
| Power (gross) | 590 hp [440.0 kW] |
| Starter volts | 12 |
| Starter | Electric |
| Torque RPM | 1500 |
Transmission Information of Challenger, MT875EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Caterpillar |
|---|---|
| Clutch | Hydraulic wet disc |
| Type | Full power shift |
| Gears | 16 forward and 4 reverse |
Mechanical Specs of Challenger, MT875EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Cab standard with air-conditioning. |
| Drive | Crawler |
|---|---|
| Steering | Power differential |
Power Information of Challenger, MT875EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Electronic |
| Rear PTO Type | 1000 (1.75) |
Hydraulics Specifications of Challenger, MT875E
Hydraulic system type, pressure, pump flow and valves.
| 36 gpm (optional) [136.3 lpm] | |
| Type | Closed center pressure flow compensated |
| 85 gpm (optional) [321.7 lpm] | |
| Pump flow | 58.1 gpm [219.9 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| SCV flow | 26.4 gpm [99.9 lpm] |
| Valves | 4 to 6 |
Three-Point Hitch of Challenger, MT875E
Hitch category and rear/front lift capacity.
| Rear lift | 19500 lbs [8845 kg] |
|---|---|
| Drawbar | Cat. 4 |
| Cat. 5 |
Electrical System of Challenger, MT875E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 1000 |
| Batteries | 4 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 300 (2x 150) |
Frequently asked questions
How much horsepower does the Challenger MT875E have?
The Challenger MT875E delivers 590 HP.
What years was the Challenger MT875E produced?
The Challenger MT875E was produced in 2014-2020.
What engine does the Challenger MT875E have?
The Challenger MT875E is powered by a Turbocharged diesel, 12-cylinder 48-valve engine.
What transmission does the Challenger MT875E use?
The Challenger MT875E uses a Caterpillar transmission.