Challenger MT875C
Power
585 hp
Production
2009-2013
Engine
Turbocharged aftercooled diesel, 6-cylinder 24-valve
Transmission
Caterpillar Powershift
From the same series:
Introduction
Production Information of Challenger, MT875C
The production information of the tractor (MT875C) includes details about its manufacturing.
| Original price was $473,854 in 2013 |
| Agricultural Crawler tractor |
| Built in Jackson, Minnesota, USA |
| Manufacturer | Challenger (a part of AGCO) |
|---|
Dimension and Tires Information of Challenger, MT875C
This section sums up the dimension and tires information of the tractor.
No data available
No data available
Engine Specifications of Challenger, MT875C
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Turbocharged aftercooled diesel |
| 6-cylinder 24-valve |
| Rated RPM | 2100 |
|---|---|
| Displacement | 1,106 ci [18.1 L] |
| Power (gross) | 585 hp [436.2 kW] |
| Bore/Stroke | 5.71x7.2 inches [145 x 183 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Fuel system | Mechanical electric injector unit (MEUI) |
| Maximum Power | 631 hp [470.5 kW] |
| Emissions | Tier III |
Transmission Information of Challenger, MT875CY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Caterpillar Powershift |
|---|---|
| Clutch | Hydraulic wet discs |
| Type | Full power shift |
| Gears | 16 forward and 4 reverse |
Mechanical Specs of Challenger, MT875CY
This section summarizes all mechanical information such as the brake system and other specifications.
| Cab standard with air-conditioning. |
| Hydraulic wet discs brakes |
| Drive | Crawler |
|---|---|
| Trailer brakes | Hydraulic OptOptional |
| Steering | Speed sensitive differential |
Power Information of Challenger, MT875CY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1.75) |
Hydraulics Specifications of Challenger, MT875C
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center pressure-flow compensated |
|---|---|
| Total flow | 43.5 gpm [164.6 lpm] |
| SCV flow | 36 gpm [136.3 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| 59 gpmOptOptional [223.3 lpm] | |
| Valves | 4 to 6 |
Electrical System of Challenger, MT875C
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 1000 |
| Batteries | 4 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 185 |
Frequently asked questions
How much horsepower does the Challenger MT875C have?
The Challenger MT875C delivers 585 HP.
What years was the Challenger MT875C produced?
The Challenger MT875C was produced in 2009-2013.
What engine does the Challenger MT875C have?
The Challenger MT875C is powered by a Turbocharged aftercooled diesel, 6-cylinder 24-valve engine.
What transmission does the Challenger MT875C use?
The Challenger MT875C uses a Caterpillar Powershift transmission.