Chamberlain 4090 tractor

Chamberlain 4090

Power

100 hp

Production

1985-1986

Engine

Diesel, 6-cylinder

Transmission

Hi-Lo

Weight

11,671 lbs (2WD) [5293 kg]

Drive

2WD/4WD

From the same series:

4290

Introduction

Production Information of Chamberlain, 4090

The production information of the tractor (4090) includes details about its manufacturing.

Row-Crop tractor
Built in Welshpool, Australia
ManufacturerChamberlain (a part of John Deere)
Total built510

Dimension and Tires Information of Chamberlain, 4090

This section sums up the dimension and tires information of the tractor.

Rear tread62.2 to 97.6 inches [157 to 247 cm]
2WD fixed Wheelbase104.2 inches [264 cm]
12,302 lbs (4WD) [5580 kg]
Shipping weight11,671 lbs (2WD) [5293 kg]
104.9 inches (2WD) [266 cm]
Front tread58.3 to 78 inches [148 to 198 cm (2WD)]
2WD Clearance (front axle)19.1 inches [48 cm]
112.4 inches (4WD) [285 cm]
Front tread68.2 to 83.9 inches [173 to 213 cm (4WD)]
Front tread64 inches [162 cm (2WD)]
4WD Clearance (front axle)21.6 inches [54 cm]
Standard tires (ag)Front: 11.00x16. Rear: 23.1x34 (2WD)
Front: 14.9x28. Rear: 23.1x34 (4WD)

Engine Specifications of Chamberlain, 4090

Get the specifications for the engine and if different options are available.

John Deere
Liquid-cooled
6-cylinder
Diesel
Coolant capacity20 qts [18.9 L]
Oil capacity12 qts [11.4 L]
Air cleanerDry with safety element
Idle RPM800-2375
Rated RPM2200
Displacement359 ci [5.9 L]
Power (net)100.5 hp [74.9 kW]
Compression16.8:1
Bore/Stroke4.19x4.33 inches [106 x 110 mm]
Starter volts12
Torque RPM1300
Torque276.6 lb-ft [375.1 Nm]

Transmission Information of Chamberlain, 4090Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Three gears (1-3) in two ranges (Slow-Fast) with hydraulic Hi-Lo power shift. Range shifts are synchronized with the clutch. Tractor must be stopped to shift gears (1-3 and R).
TransmissionHi-Lo
Oil capacity45.4 qts [43.0 L]
Clutch14-inch dry disc
TypePartial power shift
Gears12 forward and 4 reverse

Mechanical Specs of Chamberlain, 4090Y

This section summarizes all mechanical information such as the brake system and other specifications.

Cab standard with air-conditioning.
Hydraulic wet disc brakes
Drive4x2 2WD
4x4 MFWD 4WD (optional)
SteeringHydrostatic power

Power Information of Chamberlain, 4090Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
1000 (optional)
ClutchHydraulic disc
Rear PTO Type540

Hydraulics Specifications of Chamberlain, 4090

Hydraulic system type, pressure, pump flow and valves.

TypeOpen center
3 (with 3pt)
Valves4 (max)
Capacity7.2 gal [27.3 L]
Total flow15.6 gpm [59.0 lpm]
Pressure2500 psi [172.4 bar]

Three-Point Hitch of Chamberlain, 4090

Hitch category and rear/front lift capacity.

Rear TypeII
6,517 lbs (optional) [2956 kg]
ControlTop-link sensing
Rear lift (at 24"/610mm)5,355 lbs [2429 kg]

Electrical System of Chamberlain, 4090

Battery voltage, charging system and ground.

Charging systemAlternator
Battery volts6
Charging amps55
Batteries2

Frequently asked questions

How much horsepower does the Chamberlain 4090 have?

The Chamberlain 4090 delivers 100 HP.

What years was the Chamberlain 4090 produced?

The Chamberlain 4090 was produced in 1985-1986.

What engine does the Chamberlain 4090 have?

The Chamberlain 4090 is powered by a Diesel, 6-cylinder engine.

What transmission does the Chamberlain 4090 use?

The Chamberlain 4090 uses a Hi-Lo transmission.

How much does the Chamberlain 4090 weigh?

The Chamberlain 4090 weighs 11,671 lbs (2WD) [5293 kg].

Is the Chamberlain 4090 4WD?

The Chamberlain 4090 is available in 2WD/4WD.

Compare the Chamberlain 4090 with another model