Chamberlain 55KA
Power
unknown hp
Production
1954-1956
Engine
2-cylinder
Transmission
Gear
Weight
9,150 lbs [4150 kg]
Drive
2WD
Introduction
Chamberlain 55KA Standard-Tread Tractor
The Chamberlain 55KA is a classic agricultural tractor produced between 1954 and 1956 in Welshpool, Australia. Designed as a standard-tread machine, it represents a specific era of Australian agricultural engineering with a total production run of 265 units.
Engine and Cooling System
The tractor is powered by a 2-cylinder engine with a displacement of 430 cubic inches (7.0 liters). It operates at a rated speed of 1200 RPM with a compression ratio of 4:1. The engine utilizes a liquid-cooled system supported by a thermosiphon circulation method, which relies on natural convection to regulate operating temperatures.
Transmission and Drivetrain
The 55KA features a gear-type transmission providing 9 forward speeds and 3 reverse speeds, allowing for a range of operational work speeds. The tractor is configured as a two-wheel drive model and utilizes a mechanical recirculating ball steering system to assist the operator in maneuvering the machine.
Dimensions and Specifications
Weighing 9,150 lbs (4150 kg), the tractor is built for stability during fieldwork. Its physical footprint includes a wheelbase of 83 inches (210 cm), an overall length of 135 inches (342 cm), and a width of 68 inches (172 cm). The machine is equipped with 7.50x18 front agricultural tires and 15.00x30 rear agricultural tires.
Operator Station and Implements
The operator station is an open design, common for the period, prioritizing visibility. For the connection of external equipment, the tractor includes a rear power take-off (PTO) shaft operating at 540 RPM with a 1.375-inch shaft diameter.
Conclusion
The Chamberlain 55KA is a robust, low-production, two-wheel drive tractor suited for traditional agricultural tasks. Its significant weight and specific engine architecture make it a notable subject for vintage machinery enthusiasts and collectors of Australian-built equipment.
Production Information of Chamberlain, 55KA
- Standard-tread tractor
- Built in Welshpool, Australia
| Manufacturer | Chamberlain |
|---|---|
| Total built | 265 |
Dimension and Tires Information of Chamberlain, 55KA
| Wheelbase | 83 inches [210 cm] |
|---|---|
| Weight | 9,150 lbs [4150 kg] |
| Height | 90 inches [228 cm] |
| Length | 135 inches [342 cm] |
| Width | 68 inches [172 cm] |
| Ag front | 7.50x18 |
|---|---|
| Ag rear | 15.00x30 |
Engine Specifications of Chamberlain, 55KA
- Chamberlain
- Liquid-cooled
- Kerosene
- 2-cylinder
| Cooling system | Thermosiphon |
|---|---|
| Displacement | 430 ci [7.0 L] |
| Compression | 4:1 |
| Bore/Stroke | 6.625x6.25 inches [168 x 159 mm] |
| Starter volts | 12 |
| Rated RPM | 1200 |
Transmission Information of Chamberlain, 55KA
Transmission variants 1
| Transmission | Gear |
|---|---|
| Gears | 9 forward and 3 reverse |
Mechanical Specs of Chamberlain, 55KA
- Two-wheel drive
- Open operator station.
| Steering | Mechanical - recirculating ball |
|---|
Power Information of Chamberlain, 55KA
| Rear PTO Type | 540 (1.375) |
|---|
Frequently asked questions
How much horsepower does the Chamberlain 55KA have?
The Chamberlain 55KA delivers unknown HP.
What years was the Chamberlain 55KA produced?
The Chamberlain 55KA was produced in 1954-1956.
What engine does the Chamberlain 55KA have?
The Chamberlain 55KA is powered by a 2-cylinder engine.
What transmission does the Chamberlain 55KA use?
The Chamberlain 55KA uses a Gear transmission.
How much does the Chamberlain 55KA weigh?
The Chamberlain 55KA weighs 9,150 lbs [4150 kg].
Is the Chamberlain 55KA 4WD?
The Chamberlain 55KA is available in 2WD.