Cub Cadet 7232
Power
23 hp
Production
1996-1997
Transmission
Partially-synchronized gear
Weight
2391 lbs [1084 kg]
Drive
2WD
From the same series:
Introduction
Production Information of Cub Cadet, 7232
The production information of the tractor (7232) includes details about its manufacturing.
| Original price was $13,000 in 1997 |
| Compact Utility tractor |
| Distributor | Cub Cadet |
|---|---|
| Manufacturer | Mitsubishi |
Dimension and Tires Information of Cub Cadet, 7232
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 65 inches [165 cm] |
|---|---|
| Weight | 2391 lbs [1084 kg] |
| Height (ROPS) | 83.5 inches [212 cm] |
| Length | 115 inches [292 cm] |
| Max Drawbar | 837 lbs [379 kg] |
| Width | 51.8 inches [131 cm] |
| Ag front | 5.00-15 |
|---|---|
| Lawn/turf rear | 13.6-16 |
| Ag rear | 11.2-24 |
| Lawn/turf front | 25x8.50-14 |
Engine Specifications of Cub Cadet, 7232
Get the specifications for the engine and if different options are available.
| Liquid-cooled overhead valve (OHV) |
| Coolant change | 1000 h |
|---|---|
| Coolant capacity | 5.6 qts [5.3 L] |
| Fuel system | Direct injection |
| Intake valve clearance | 0.010 inches*Cold [0.254 mm] |
| Compression | 18.7:1 |
| Rated RPM | 2500 |
| Air cleaner | Dry |
| Displacement | 75.4 ci [1.2 L] |
| Power | 23 hp [17.2 kW] |
| Oil capacity | 3.7 qts [3.5 L] |
| Oil change | 100 h |
| Bore/Stroke | 3.228x3.071 inches [82 x 78 mm] |
| Starter volts | 12 |
| Exhaust valve clearance | 0.010 inches*Cold [0.254 mm] |
| Firing order | 1-3-2 |
| Idle RPM | 970-2750 |
Transmission Information of Cub Cadet, 7232Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears (1-3) plus reverse (R) in three ranges (low, medium, and high). Gear shifts are synchronized using the foot clutch. Tractor must be stopped, and clutch used, to shift range. |
| Oil change | 200 h |
|---|---|
| Type | Partially-synchronized gear |
| Oil type | Cub Cadet Hy-Tran |
| Oil capacity | 25.4 qts [24.0 L] |
| Gears | 9 forward and 3 reverse |
| Cub Cadet Hy-Tran | |
| Clutch | 215mm mechanical dry disc |
Mechanical Specs of Cub Cadet, 7232Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Two-post foldable ROPS. Optional canopy. |
| Wet disc brakes |
| Differential lock | Rear standard |
|---|---|
| Steering | Hydrostatic power |
Power Information of Cub Cadet, 7232Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live *Two-stage foot clutch. |
|---|---|
| Mid PTO Type | 2000 (1.0) |
| Mid PTO | Live *Two-stage foot clutch. |
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 2000@2421 |
| Engine RPM | 540@2356 |
Hydraulics Specifications of Cub Cadet, 7232
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 3.2 gpm [12.1 lpm] |
| Pressure | 2133 psi [147.1 bar] |
| Pump flow | 7.2 gpm [27.3 lpm] |
Three-Point Hitch of Cub Cadet, 7232
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at ends) | 2205 lbs [1000 kg] |
| Rear lift (at 24"/610mm) | 1653 lbs [749 kg] |
Electrical System of Cub Cadet, 7232
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Cub Cadet 7232 have?
The Cub Cadet 7232 delivers 23 HP.
What years was the Cub Cadet 7232 produced?
The Cub Cadet 7232 was produced in 1996-1997.
What transmission does the Cub Cadet 7232 use?
The Cub Cadet 7232 uses a Partially-synchronized gear transmission.
How much does the Cub Cadet 7232 weigh?
The Cub Cadet 7232 weighs 2391 lbs [1084 kg].
Is the Cub Cadet 7232 4WD?
The Cub Cadet 7232 is available in 2WD.