Introduction
Production Information of Deutz-Allis, 6060
The production information of the tractor (6060) includes details about its manufacturing.
| Row-Crop tractor |
| Built in West Allis, Wisconsin, USA |
| Manufacturer | Deutz-Allis |
|---|---|
| Original price | $21,460 |
| Total built | 4,027 |
Dimension and Tires Information of Deutz-Allis, 6060
This section sums up the dimension and tires information of the tractor.
| 26.7 inches (rear axle) [67 cm] | |
| Wheelbase | 93 inches (2WD) [236 cm] |
| Ground clearance | 18.1 inches (4WD front axle) [45 cm] |
| Width | 68.5 inches [173 cm] |
| 91.9 inches (4WD) [233 cm] | |
| 20.4 inches (2WD front axle) [51 cm] | |
| Length | 146.5 inches [372 cm] |
| Ag front | 7.50-16 (2WD) |
|---|---|
| 18.4-28 (4WD) | |
| 11.2-24 (4WD) | |
| Ag rear | 16.9-28 (2WD) |
Engine Specifications of Deutz-Allis, 6060
Get the specifications for the engine and if different options are available.
| Allis Chalmers 433T |
| Liquid-cooled |
| Turbocharged diesel |
| 4-cylinder |
| Oil capacity | 10 qts [9.5 L] |
|---|---|
| Displacement | 200 ci [3.3 L] |
| Compression | 14.1:1 |
| Bore/Stroke | 3.876x4.250 inches [98 x 108 mm] |
| Coolant capacity | 17 qts [16.1 L] |
| Starter volts | 12 |
| Rated RPM | 2300 |
| Air cleaner | Paper element with pre-cleander |
Transmission Information of Deutz-Allis, 6060Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Two ranges with four gears in each range. Synchronized shifting between top two gears (3-4 and 7-8) in each range. |
| Type | Partially synchronized |
|---|---|
| Gears | 8 forward and 2 reverse |
| Oil capacity | 12 qts [11.4 L] |
Mechanical Specs of Deutz-Allis, 6060Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-post ROPS canopy. Cab and air-conditioning optional. |
| Differential hydraulic wet disc brakes |
| Drive | 4x2 2WD |
|---|---|
| 4x4 MFWD 4WD (optional) | |
| Steering | Hydrostatic power |
Power Information of Deutz-Allis, 6060Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of Deutz-Allis, 6060
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 19 gpm [71.9 lpm] |
| Valves | 2 |
| Pump flow | 11.4 gpm [43.1 lpm] |
Three-Point Hitch of Deutz-Allis, 6060
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift (at 24"/610mm) | 3,500 lbs [1587 kg] |
Electrical System of Deutz-Allis, 6060
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery volts | 12 |
| 2 (optional) | |
| Charging amps | 72 |
| Batteries | 1 |
Frequently asked questions
How much horsepower does the Deutz-Allis 6060 have?
The Deutz-Allis 6060 delivers 70 hp[P] HP.
What years was the Deutz-Allis 6060 produced?
The Deutz-Allis 6060 was produced in 1985-1988.
What engine does the Deutz-Allis 6060 have?
The Deutz-Allis 6060 is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the Deutz-Allis 6060 use?
The Deutz-Allis 6060 uses a Partially synchronized transmission.
Is the Deutz-Allis 6060 4WD?
The Deutz-Allis 6060 is available in 2WD/4WD.