Introduction
Production Information of Deutz-Allis, 6275
The production information of the tractor (6275) includes details about its manufacturing.
| Utility tractor |
| Built in Germany |
| Manufacturer | Deutz-Allis |
|---|
Dimension and Tires Information of Deutz-Allis, 6275
This section sums up the dimension and tires information of the tractor.
| 2WD Wheelbase | 91.5 inches [232 cm] |
|---|---|
| Height (cab) | 101.3 inches [257 cm] |
| Height (ROPS) | 97.3 inches [247 cm] |
| 4WD Wheelbase | 94 inches [238 cm] |
| Rear tread | 59 to 78.8 inches [149 to 200 cm] |
| Width | 82.3 inches [209 cm] |
| 2WD Standard tires (ag) | Front: 10.00-16. Rear: 18.4-30 |
|---|---|
| 4WD Standard tires (ag) | Front: 12.4-24. Rear: 18.4-30 |
| 2WD Optional tires (ag) | Front: 11.00-16. Rear: 16.9-34 |
Engine Specifications of Deutz-Allis, 6275
Get the specifications for the engine and if different options are available.
| Deutz F4L 913 |
| Air-cooled |
| Diesel |
| 4-cylinder |
| Power | 75 hp [55.9 kW] |
|---|---|
| Displacement | 249 ci [4.1 L] |
| Rated RPM | 2350 |
| Bore/Stroke | 3.94x4.84 inches [100 x 123 mm] |
| Oil capacity | 10.5 qts [9.9 L] |
| Starter volts | 12 |
Transmission Information of Deutz-Allis, 6275Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four synchronized gears in three ranges, plus reverse range. |
| Transmission | Triple-range |
|---|---|
| Clutch | Dry disc |
| Type | Partially synchronized |
| Gears | 12 forward and 4 reverse |
Mechanical Specs of Deutz-Allis, 6275Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Four-post ROPS. StarCab optional. |
| Hydraulic drum brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Deutz-Allis, 6275Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Deutz-Allis, 6275
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 11.4 gpm [43.1 lpm] |
| Valves | 1 to 3 |
| Capacity | 4 gal [15.1 L] |
| Total flow | 17.7 gpm [67.0 lpm] |
| Pressure | 2358 psi [162.6 bar] |
Three-Point Hitch of Deutz-Allis, 6275
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift | 7275 lbs [3299 kg] |
Electrical System of Deutz-Allis, 6275
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Deutz-Allis 6275 have?
The Deutz-Allis 6275 delivers 75 HP.
What years was the Deutz-Allis 6275 produced?
The Deutz-Allis 6275 was produced in 1986-1990.
What engine does the Deutz-Allis 6275 have?
The Deutz-Allis 6275 is powered by a Diesel, 4-cylinder engine.
What transmission does the Deutz-Allis 6275 use?
The Deutz-Allis 6275 uses a Triple-range transmission.
Is the Deutz-Allis 6275 4WD?
The Deutz-Allis 6275 is available in 2WD/4WD.