Deutz-Allis 7120 tractor

Deutz-Allis 7120

Power

135 hp[P] hp

Production

1986-1990

Engine

Turbocharged diesel, 6-cylinder

Transmission

POWERMATIC

Drive

2WD/4WD

From the same series:

7110
7145

Introduction

Production Information of Deutz-Allis, 7120

The production information of the tractor (7120) includes details about its manufacturing.

Row-Crop tractor
The Deutz-Allis 7120 is similar to the Deutz-Fahr DX 6.50.
ManufacturerDeutz-Allis

Dimension and Tires Information of Deutz-Allis, 7120

This section sums up the dimension and tires information of the tractor.

22.4 inches (4WD) [56 cm]
Wheelbase105.8 inches (2WD) [268 cm]
Width95.5 inches [242 cm]
179.5 inches (4WD) [455 cm]
106.4 inches (4WD) [270 cm]
Clearance (front axle)24.4 inches (2WD) [61 cm]
Length177.1 inches (2WD) [449 cm]
Ag front11.00-16 (2WD)
Ag rear20.8x38
Ag front16.9x28 (4WD)
14.9-28 (4WD)
Ag rear18.4-38

Engine Specifications of Deutz-Allis, 7120

Get the specifications for the engine and if different options are available.

Air-cooled
Turbocharged diesel
6-cylinder
Starter volts12
Displacement374 ci [6.1 L]
Air cleanerDual paper elements with pre-cleaner
Bore/Stroke4.02x4.92 inches [102 x 125 mm]
Oil capacity17 qts [16.1 L]
Starter power5 hp [3.7 kW]
Rated RPM2300
Compression15.5:1
Fuel use7.4 gal/hour [28.0 l/hour]

Transmission Information of Deutz-Allis, 7120Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four speeds (1-4) in three ranges (L/M/H) with high/low power shift.
TransmissionPOWERMATIC
Oil capacity56 qts [53.0 L]
ClutchHydraulic dry disc
TypeSynchronized with partial power shift
Gears24 forward and 8 reverse

Transmission variants 2

Gears32 forward and 8 reverse
Oil capacity56 qts [53.0 L]
24-speed synchronized with partial power shift
32-speed

Mechanical Specs of Deutz-Allis, 7120Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Differential hydraulic dry disc brakes
Detuz-Allis MasterCab standard with heat and air-conditioning. Agrotronic instrumentation standard, optional Agrotronic II.
SteeringHydrostatic power
Differential lockPush-button rear
OPTICTRAC automatic front

Power Information of Deutz-Allis, 7120Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Front PTO Type1000
Rear PTO Type540/1000
Front PTOIndependent OptOptional

Hydraulics Specifications of Deutz-Allis, 7120

Hydraulic system type, pressure, pump flow and valves.

Steering flow9.2 gpm [34.8 lpm]
TypeOpen center
Pump flow14.8 gpm [56.0 lpm]
Valves1 to 3
Capacity10 gal [37.9 L]
Total flow24 gpm [90.8 lpm]
Pressure2538 psi [175.0 bar]

Three-Point Hitch of Deutz-Allis, 7120

Hitch category and rear/front lift capacity.

Rear TypeIII
Front lift6,393 lbs [2899 kg]
Rear lift14,330 lbs [6500 kg]
Front HitchII OptOptional

Electrical System of Deutz-Allis, 7120

Battery voltage, charging system and ground.

Charging systemAlternator
Battery volts6
Batteries2
Charging amps90
Charging volts14

Frequently asked questions

How much horsepower does the Deutz-Allis 7120 have?

The Deutz-Allis 7120 delivers 135 hp[P] HP.

What years was the Deutz-Allis 7120 produced?

The Deutz-Allis 7120 was produced in 1986-1990.

What engine does the Deutz-Allis 7120 have?

The Deutz-Allis 7120 is powered by a Turbocharged diesel, 6-cylinder engine.

What transmission does the Deutz-Allis 7120 use?

The Deutz-Allis 7120 uses a POWERMATIC transmission.

Is the Deutz-Allis 7120 4WD?

The Deutz-Allis 7120 is available in 2WD/4WD.

Compare the Deutz-Allis 7120 with another model