Deutz-Allis 8010
Power
119 hp[P] hp
Production
1985-1988
Engine
Turbocharged diesel, 6-cylinder
Transmission
Allis-Chalmers Power Director
Weight
12,630 lbs [5728 kg]
Drive
2WD/4WD
From the same series:
Introduction
Allis-Chalmers 8010 Row-Crop Tractor
The Allis-Chalmers 8010 is a row-crop tractor produced by Deutz-Allis between 1985 and 1988 in West Allis, Wisconsin. As part of the 8000 series, this machine was engineered for demanding agricultural operations, offering a balance of mechanical power, operator comfort, and hydraulic versatility.
Engine and Performance
The tractor is powered by an Allis-Chalmers 649T engine, a 301 cubic-inch (4.9 L) liquid-cooled, inline 6-cylinder turbocharged diesel unit. It operates at a rated speed of 2300 RPM. This engine configuration provides the necessary torque for heavy-duty field work, supported by a compression ratio of 15.5:1.
Transmission and Drivetrain
The 8010 offers multiple transmission configurations to suit different operational needs, including a 16-speed or 20-speed partial power shift, or a 12-speed Allis-Chalmers power shift unit. These systems utilize a left-hand lever for range and power shift control. The tractor is available in either two-wheel or four-wheel drive variants, featuring differential hydraulic wet disc brakes and electro-hydraulic rear differential locks for enhanced traction.
Hydraulics and Hitch
The hydraulic system is load-sensitive, delivering a total flow capacity of 45 gpm (170.3 lpm). This system supports the rear Category II three-point hitch, which has a lift capacity of 6,680 lbs (3030 kg) at 24 inches behind the lift point. The independent rear PTO provides dual speeds of 540 and 1000 RPM, allowing for the operation of a wide range of implements.
Operator Environment
The 8010 is equipped with the Acousta cab as a standard feature, which includes integrated heating and air-conditioning systems to maintain operator comfort during long field hours. Optional equipment for the cabin included a radio and cassette player.
Conclusion
With 1,832 units produced, the Allis-Chalmers 8010 is a robust, mid-range row-crop tractor suitable for varied agricultural tasks requiring reliable power, hydraulic efficiency, and operational flexibility through its multiple transmission options.
Production Information of Deutz-Allis, 8010
- Row-Crop tractor
- Built in West Allis, Wisconsin, USA
| Manufacturer | Deutz-Allis |
|---|---|
| Original price | $46,176 |
| Total built | 1,832 |
Dimension and Tires Information of Deutz-Allis, 8010
| 4WD 21 2WD} Clearance (front axle) | 17.5 inches [44 cm] |
|---|---|
| 2WD Wheelbase | 106 inches [269 cm] |
| 2WD Weight | 12,630 lbs [5728 kg] |
| Width | 92.6 inches [235 cm] |
| 4WD Wheelbase | 96 inches [243 cm] |
| Clearance (rear axle) | 28 inches [71 cm] |
| 4WD Weight | 13,600 lbs [6168 kg] |
| Length | 187 inches [474 cm] |
| Ag front | 10.00-16 (2WD) |
|---|---|
| Ag front(optional) | 14L-16 (2WD) |
| Ag front | 11.00-16 (2WD) |
| Ag front(optional) | 13.6-28 (4WD) |
| Ag front(optional) | 14.9-24 (4WD) |
| Ag front(optional) | 18.4-16 (2WD) |
| Ag rear | 18.4-38 |
| Ag rear(optional) | 18.4-42 |
| Ag rear | 20.8-38 |
| Ag rear(optional) | 14.9-28 (4WD) |
Engine Specifications of Deutz-Allis, 8010
- Allis Chalmers 649T
- Liquid-cooled inline
- Turbocharged diesel
- 6-cylinder
| Starter volts | 12 |
|---|---|
| Displacement | 301 ci [4.9 L] |
| Compression | 15.5:1 |
| Bore/Stroke | 3.875x4.25 inches [98 x 108 mm] |
| Coolant capacity | 26 qts [24.6 L] |
| Oil capacity | 16 qts [15.1 L] |
| Firing order | 1-5-3-6-2-4 |
| Rated RPM | 2300 |
| Air cleaner | Dry |
Transmission Information of Deutz-Allis, 8010
Transmission variants 1
- Four gears (1-4) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever.
| Transmission | Allis-Chalmers Power Director |
|---|---|
| Oil capacity | 29.6 qts [28.0 L] |
| Type | Partial power shift |
| Gears | 16 forward and 4 reverse |
Transmission variants 2
- Five gears (1-5) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever.
| Transmission | Allis-Chalmers Power Director |
|---|---|
| Oil capacity | 29.6 qts [28.0 L] |
| Type | Partial power shift |
| Gears | 20 forward and 4 reverse |
Transmission variants 3
- Six power shift gears (1-6) in two ranges (slow/fast). Clutch must be used to shift range. Pressing the clutch pedal half-way automatically downshifts from 5th/6th to 4th gear.
| Transmission | Power Shift |
|---|---|
| Oil capacity | 29.6 qts [28.0 L] |
| Type | Allis-Chalmers |
| Gears | 12 forward and 2 reverse |
- 16-speed partial power shift
- 20-speed partial power shift
- 12-speed Allis-Chalmers
Mechanical Specs of Deutz-Allis, 8010
- Two- or four-wheel drive
- Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player.
- Differential hydraulic wet discs brakes
| Differential lock | Electro-hydraulic rear |
|---|---|
| Steering | Hydrostatic power |
Power Information of Deutz-Allis, 8010
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of Deutz-Allis, 8010
| Type | Load-sensitive |
|---|---|
| Total flow | 45 gpm [170.3 lpm] |
| Total flow(optional) | 13.5 gpm (transmission) [51.1 lpm] |
| Valves | 2 or 3 |
| Steering flow | 9.5 gpm [36.0 lpm] |
| Pump flow | 22 gpm [83.3 lpm] |
Three-Point Hitch of Deutz-Allis, 8010
| Rear Type | II |
|---|---|
| Rear lift (at 24"/610mm) | 6,680 lbs [3030 kg] |
Electrical System of Deutz-Allis, 8010
| Charging system | Alternator |
|---|---|
| Charging amps | 100 |
| Battery volts | 12 |
Where it sits
With 119 hp[P] HP, the Deutz-Allis 8010 sits just below 8030 (148 HP) in Deutz-Allis's range. Its power puts it in the 77th percentile of 1980s models in our database (2052 machines).
Frequently asked questions
How much horsepower does the Deutz-Allis 8010 have?
The Deutz-Allis 8010 delivers 119 hp[P] HP.
What years was the Deutz-Allis 8010 produced?
The Deutz-Allis 8010 was produced in 1985-1988.
What engine does the Deutz-Allis 8010 have?
The Deutz-Allis 8010 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the Deutz-Allis 8010 use?
The Deutz-Allis 8010 uses a Allis-Chalmers Power Director transmission.
How much does the Deutz-Allis 8010 weigh?
The Deutz-Allis 8010 weighs 12,630 lbs [5728 kg].
Is the Deutz-Allis 8010 4WD?
The Deutz-Allis 8010 is available in 2WD/4WD.