Introduction
Production Information of Deutz-Fahr, 4080E
The production information of the tractor (4080E) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Deutz-Fahr |
|---|
Dimension and Tires Information of Deutz-Fahr, 4080E
This section sums up the dimension and tires information of the tractor.
| 2WD Wheelbase | 85.3 inches [216 cm] |
|---|---|
| Width | 72.4 inches [183 cm] |
| 4WD Wheelbase | 82.7 inches [210 cm] |
| Length | 152 inches [386 cm] |
| Standard tires (ag) | Front: 320/85R20. Rear: 420/85R28 |
|---|
Engine Specifications of Deutz-Fahr, 4080E
Get the specifications for the engine and if different options are available.
| SDF FARMotion KD3TA |
| Liquid-cooled inline |
| Turbocharged intercooled diesel |
| 3-cylinder |
| Torque RPM | 1600 |
|---|---|
| Displacement | 176.2 ci [2.9 L] |
| Rated Power (gross) | 74.3 hp [55.4 kW] |
| Bore/Stroke | 4.06x4.53 inches [103 x 115 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Torque | 252.3 lb-ft [342.1 Nm] |
| Rated RPM | 2200 |
| Emissions | Stage IIIB |
Transmission Information of Deutz-Fahr, 4080EY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Gear |
|---|---|
| Gears | 12 forward and 3 reverse |
Transmission variants 2
| Four synchronized gears in two ranges with shuttle. |
| Type | Partially synchronized |
|---|---|
| Gears | 8 forward and reverse |
Transmission variants 3
| Five synchronized gears in three ranges with shuttle. |
| Type | Partially synchronized |
|---|---|
| Gears | 15 forward and reverse |
| 12-speed gear |
| 8-speed partially synchronized |
| 15-speed partially synchronized |
Mechanical Specs of Deutz-Fahr, 4080EY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical |
|---|
Power Information of Deutz-Fahr, 4080EY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 540/540E/1000 OptOptional | |
| Rear PTO Type | 540 |
| 540/540E OptOptional |
Hydraulics Specifications of Deutz-Fahr, 4080E
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| 13.2 gpmOptOptional [50.0 lpm] | |
| Valves | 1 to 3 |
| Pump flow | 11.1 gpm [42.0 lpm] |
Three-Point Hitch of Deutz-Fahr, 4080E
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| 7717 lbsOptOptional [3500 kg] | |
| Control | Position and draft control |
| Rear lift | 5512 lbs [2500 kg] |
Electrical System of Deutz-Fahr, 4080E
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Deutz-Fahr 4080E have?
The Deutz-Fahr 4080E delivers 74 HP.
What years was the Deutz-Fahr 4080E produced?
The Deutz-Fahr 4080E was produced in 2018+.
What engine does the Deutz-Fahr 4080E have?
The Deutz-Fahr 4080E is powered by a Turbocharged intercooled diesel, 3-cylinder engine.
What transmission does the Deutz-Fahr 4080E use?
The Deutz-Fahr 4080E uses a Gear transmission.
Is the Deutz-Fahr 4080E 4WD?
The Deutz-Fahr 4080E is available in 2WD/4WD.