Deutz-Fahr DX 130
Power
133 hp[P] hp
Production
1981-1983
Engine
Turbocharged diesel, 6-cylinder
Transmission
Two-speed power shift
Weight
13940 lbs (18.4-38 duals) [6323 kg]
Drive
2WD/4WD
From the same series:
Introduction
Production Information of Deutz-Fahr, DX 130
The production information of the tractor (DX 130) includes details about its manufacturing.
| Row-Crop tractor |
| Manufacturer | Deutz-Fahr |
|---|
Dimension and Tires Information of Deutz-Fahr, DX 130
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 108.5 inches [275 cm] |
|---|---|
| Ballasted weight | 17630 lbs [7996 kg] |
| Operating weight | 13940 lbs (18.4-38 duals) [6323 kg] |
| Width | 93.3 inches [236 cm] |
| Rear tread | 63 to 86 inches [160 to 218 cm] |
| Height | 113 inches [287 cm] |
| Standard tires (ag) | Front: 11.00-16. Rear: 18.4-38 (2WD) |
|---|---|
| Front: 14.9-28. Rear: 20.8-38 (4WD) |
Engine Specifications of Deutz-Fahr, DX 130
Get the specifications for the engine and if different options are available.
| Deutz BF6L 913 |
| Air-cooled |
| Turbocharged diesel |
| 6-cylinder |
| Oil capacity | 16.9 qts [16.0 L] |
|---|---|
| Displacement | 373.9 ci [6.1 L] |
| Rated RPM | 2300 |
| Bore/Stroke | 4.02x4.92 inches [102 x 125 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Compression | 15.5:1 |
Transmission Information of Deutz-Fahr, DX 130Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in three ranges (low, medium, high) with two-speed power shift. |
| Type | Two-speed power shift |
|---|---|
| Oil capacity | 56 qts [53.0 L] |
| Gears | 24 forward and 8 reverse |
| Clutch | Hydraulic dry disc |
Mechanical Specs of Deutz-Fahr, DX 130Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Hydraulic disc brakes |
| Cab standard with air-conditioning. |
| Steering | Hydrostatic power |
|---|---|
| Final drives | Planetary |
| Differential lock | Hydraulic foot-operated |
Power Information of Deutz-Fahr, DX 130Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2070 | |
| Rear PTO Type | 540/1000 (1.375) |
| Engine RPM | 540@2070 |
Hydraulics Specifications of Deutz-Fahr, DX 130
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Valves | 1 to 3 |
| Total flow | 27 gpm [102.2 lpm] |
Three-Point Hitch of Deutz-Fahr, DX 130
Hitch category and rear/front lift capacity.
| Rear Type | III/II |
|---|---|
| Rear lift (at ends) | 14330 lbs [6500 kg] |
Electrical System of Deutz-Fahr, DX 130
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Deutz-Fahr DX 130 have?
The Deutz-Fahr DX 130 delivers 133 hp[P] HP.
What years was the Deutz-Fahr DX 130 produced?
The Deutz-Fahr DX 130 was produced in 1981-1983.
What engine does the Deutz-Fahr DX 130 have?
The Deutz-Fahr DX 130 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the Deutz-Fahr DX 130 use?
The Deutz-Fahr DX 130 uses a Two-speed power shift transmission.
How much does the Deutz-Fahr DX 130 weigh?
The Deutz-Fahr DX 130 weighs 13940 lbs (18.4-38 duals) [6323 kg].
Is the Deutz-Fahr DX 130 4WD?
The Deutz-Fahr DX 130 is available in 2WD/4WD.