Deutz-Fahr M610
Power
132 hp
Production
2007-2009
Engine
Turbocharged intercooled diesel, 6-cylinder 12-valve
Transmission
ZF 7200
Weight
12040 lbs [5461 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Deutz-Fahr, M610
The production information of the tractor (M610) includes details about its manufacturing.
| Manufacturer | Deutz-Fahr |
|---|
Dimension and Tires Information of Deutz-Fahr, M610
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 104.3 inches [264 cm] |
|---|---|
| Weight | 12040 lbs [5461 kg] |
| Length | 180.7 inches [458 cm] |
| Height (cab) | 115 inches [292 cm] |
| Standard tires (ag) | Front: 480/70R24. Rear: 520/70R38 |
|---|
Engine Specifications of Deutz-Fahr, M610
Get the specifications for the engine and if different options are available.
| Deutz |
| Liquid-cooled |
| Turbocharged intercooled diesel |
| 6-cylinder 12-valve |
| Torque RPM | 1200 |
|---|---|
| Displacement | 369.6 ci [6.1 L] |
| Maximum Power | 143 hp [106.6 kW] |
| Bore/Stroke | 3.98x4.96 inches [101 x 126 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Torque | 423.4 lb-ft [574.1 Nm] |
| Rated RPM | 2100 |
| Power | 132 hp [98.4 kW] |
Transmission Information of Deutz-Fahr, M610Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four power shift gears in six synchronized ranges with power shuttle. |
| Transmission | ZF 7200 |
|---|---|
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 24 forward and reverse |
Transmission variants 2
| Optional creeper provides an additional four ranges (with four speeds each) to the main transmission. |
| Manufacturer | ZF |
|---|---|
| Clutch | Wet disc |
| Type | Creeper |
| Gears | 40 forward and reverse |
| 24-speed partial power shift |
| 40-speed creeper |
Mechanical Specs of Deutz-Fahr, M610Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. |
| Power steering |
| Wet disc brakes |
Power Information of Deutz-Fahr, M610Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Front PTO | Independent OptOptional |
|---|---|
| Rear PTO | Independent |
| 1000@1995 | |
| 540E@1610 | |
| Rear PTO Type | 540/1000 |
| Front PTO Type | 1000 |
| 1000E@1610 | |
| Engine RPM | 540@1995 |
| Engine RPM | 1000@1960 |
Hydraulics Specifications of Deutz-Fahr, M610
Hydraulic system type, pressure, pump flow and valves.
| 31.7 gpm*Load sensing [120.0 lpm] | |
| Type | Open center |
| Rear valves | 4 |
| Pressure | 2900 psi [200.0 bar] |
| Load sensing OptOptional | |
| Steering flow | 11 gpm [41.6 lpm] |
| Pump flow | 21.9 gpm*Open center [82.9 lpm] |
| Capacity | 10.6 gal [40.1 L] |
| Steering press. | 2600 psi [179.3 bar] |
Three-Point Hitch of Deutz-Fahr, M610
Hitch category and rear/front lift capacity.
| Rear Type | III/II |
|---|---|
| Front Hitch | II |
| 20240 lbsOptOptional [9180 kg] | |
| Control | Position and draft control |
| Front lift | 8800 lbs [3991 kg] |
| Rear lift | 13640 lbs [6187 kg] |
Electrical System of Deutz-Fahr, M610
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| 190 OptOptional | |
| Battery AH | 143 |
| Charging amps | 150 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Deutz-Fahr M610 have?
The Deutz-Fahr M610 delivers 132 HP.
What years was the Deutz-Fahr M610 produced?
The Deutz-Fahr M610 was produced in 2007-2009.
What engine does the Deutz-Fahr M610 have?
The Deutz-Fahr M610 is powered by a Turbocharged intercooled diesel, 6-cylinder 12-valve engine.
What transmission does the Deutz-Fahr M610 use?
The Deutz-Fahr M610 uses a ZF 7200 transmission.
How much does the Deutz-Fahr M610 weigh?
The Deutz-Fahr M610 weighs 12040 lbs [5461 kg].
Is the Deutz-Fahr M610 4WD?
The Deutz-Fahr M610 is available in 4WD.