Deutz-Fahr M620 tractor

Deutz-Fahr M620

Power

155 hp

Production

2007-2009

Engine

Turbocharged intercooled diesel, 6-cylinder 12-valve

Transmission

ZF 7200

Weight

12730 lbs [5774 kg]

Drive

4WD

From the same series:

M610
M640

Introduction

Production Information of Deutz-Fahr, M620

The production information of the tractor (M620) includes details about its manufacturing.

ManufacturerDeutz-Fahr

Dimension and Tires Information of Deutz-Fahr, M620

This section sums up the dimension and tires information of the tractor.

Wheelbase104.3 inches [264 cm]
Weight12730 lbs [5774 kg]
Length180.7 inches [458 cm]
Height (cab)115 inches [292 cm]
Standard tires (ag)Front: 480/70R24. Rear: 520/70R38

Engine Specifications of Deutz-Fahr, M620

Get the specifications for the engine and if different options are available.

Deutz
Liquid-cooled
Turbocharged intercooled diesel
6-cylinder 12-valve
Torque RPM1400
Displacement369.6 ci [6.1 L]
Maximum Power166 hp [123.8 kW]
Bore/Stroke3.98x4.96 inches [101 x 126 mm]
Starter volts12
StarterElectric
Torque483.1 lb-ft [655.1 Nm]
Rated RPM2100
Power155 hp [115.6 kW]

Transmission Information of Deutz-Fahr, M620Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four power shift gears in six synchronized ranges with power shuttle.
TransmissionZF 7200
ClutchWet disc
TypePartial power shift
Gears24 forward and reverse

Transmission variants 2

Optional creeper provides an additional four ranges (with four speeds each) to the main transmission.
ManufacturerZF
ClutchWet disc
TypeCreeper
Gears40 forward and reverse
24-speed partial power shift
40-speed creeper

Mechanical Specs of Deutz-Fahr, M620Y

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Cab standard with air-conditioning.
Power steering
Wet disc brakes

Power Information of Deutz-Fahr, M620Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Front PTOIndependent OptOptional
Rear PTOIndependent
1000@1995
540E@1610
Rear PTO Type540/1000
Front PTO Type1000
1000E@1610
Engine RPM540@1995
Engine RPM1000@1960

Hydraulics Specifications of Deutz-Fahr, M620

Hydraulic system type, pressure, pump flow and valves.

31.7 gpm*Load sensing [120.0 lpm]
TypeOpen center
Rear valves4
Pressure2900 psi [200.0 bar]
Load sensing OptOptional
Steering flow11 gpm [41.6 lpm]
Pump flow21.9 gpm*Open center [82.9 lpm]
Capacity10.6 gal [40.1 L]
Steering press.2600 psi [179.3 bar]

Three-Point Hitch of Deutz-Fahr, M620

Hitch category and rear/front lift capacity.

Rear TypeIII/II
Front HitchII
20240 lbsOptOptional [9180 kg]
ControlPosition and draft control
Front lift8800 lbs [3991 kg]
Rear lift13640 lbs [6187 kg]

Electrical System of Deutz-Fahr, M620

Battery voltage, charging system and ground.

Charging systemAlternator
190 OptOptional
Battery AH143
Charging amps150
Battery volts12

Frequently asked questions

How much horsepower does the Deutz-Fahr M620 have?

The Deutz-Fahr M620 delivers 155 HP.

What years was the Deutz-Fahr M620 produced?

The Deutz-Fahr M620 was produced in 2007-2009.

What engine does the Deutz-Fahr M620 have?

The Deutz-Fahr M620 is powered by a Turbocharged intercooled diesel, 6-cylinder 12-valve engine.

What transmission does the Deutz-Fahr M620 use?

The Deutz-Fahr M620 uses a ZF 7200 transmission.

How much does the Deutz-Fahr M620 weigh?

The Deutz-Fahr M620 weighs 12730 lbs [5774 kg].

Is the Deutz-Fahr M620 4WD?

The Deutz-Fahr M620 is available in 4WD.

Compare the Deutz-Fahr M620 with another model