Deutz-Fahr DX 160
Power
150 hp
Production
1978-1983
Engine
Turbocharged diesel, 6-cylinder
Transmission
Triple Range
Drive
2WD/4WD
From the same series:
Introduction
Production Information of Deutz-Fahr, DX 160
The production information of the tractor (DX 160) includes details about its manufacturing.
| Row-Crop tractor |
| Manufacturer | Deutz-Fahr |
|---|
Dimension and Tires Information of Deutz-Fahr, DX 160
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 111.5 inches [283 cm] |
|---|---|
| Rear tread | 70 to 86 inches [177 to 218 cm] |
| Height | 112 inches [284 cm] |
| Length | 185.8 inches [471 cm] |
| Width | 93.3 inches [236 cm] |
| Standard tires (ag) | Front: 11.00-16. Rear: 20.8x38 (2WD) |
|---|---|
| Front: 14.9-28. Rear: 20.8x38 (4WD) |
Engine Specifications of Deutz-Fahr, DX 160
Get the specifications for the engine and if different options are available.
| Deutz BF6L 913 |
| Air-cooled |
| Turbocharged diesel |
| 6-cylinder |
| Oil capacity | 16.9 qts [16.0 L] |
|---|---|
| Displacement | 373.9 ci [6.1 L] |
| Compression | 15.5:1 |
| Bore/Stroke | 4.016x4.92 inches [102 x 125 mm] |
| Starter volts | 12 |
| Rated RPM | 2200 |
| Power | 150 hp [111.9 kW] |
Transmission Information of Deutz-Fahr, DX 160Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in three ranges (low, medium, high) with two-speed power shift. |
| Transmission | Triple Range |
|---|---|
| Oil capacity | 79.25 qts [75.0 L] |
| Clutch | Dry disc |
| Type | Partially synchronized |
| Gears | 24 forward and 8 reverse |
Mechanical Specs of Deutz-Fahr, DX 160Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard. |
| Final drives | Planetary |
|---|---|
| Differential lock | Hydraulic foot-operated |
Power Information of Deutz-Fahr, DX 160Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 1000@1920 |
| Rear PTO Type | 1000 (1.75) |
| 540/1000 *Sales literature lists a optional shiftable PTO, but the option appears to be rare. |
Hydraulics Specifications of Deutz-Fahr, DX 160
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 27 gpm [102.2 lpm] |
| Pump flow | 15.3 gpm [57.9 lpm] |
| Pressure | 2538 psi [175.0 bar] |
| Valves | 1 to 3 |
Three-Point Hitch of Deutz-Fahr, DX 160
Hitch category and rear/front lift capacity.
| Rear Type | III |
|---|---|
| Rear lift (at ends) | 14330 lbs [6500 kg] |
Electrical System of Deutz-Fahr, DX 160
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Deutz-Fahr DX 160 have?
The Deutz-Fahr DX 160 delivers 150 HP.
What years was the Deutz-Fahr DX 160 produced?
The Deutz-Fahr DX 160 was produced in 1978-1983.
What engine does the Deutz-Fahr DX 160 have?
The Deutz-Fahr DX 160 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the Deutz-Fahr DX 160 use?
The Deutz-Fahr DX 160 uses a Triple Range transmission.
Is the Deutz-Fahr DX 160 4WD?
The Deutz-Fahr DX 160 is available in 2WD/4WD.