Introduction
International Harvester Farmall F-30 Row-Crop Tractor
The International Harvester F-30 is a row-crop tractor produced between 1931 and 1939. Manufactured in Rock Island, Illinois, this model represents a significant part of the Farmall lineup, with a total production of 28,902 units during its manufacturing lifespan.
Engine and Performance
The tractor is powered by a 4-cylinder, liquid-cooled vertical I-head engine with a displacement of 283.7 cubic inches (4.6 liters). It operates at a rated speed of 1150 RPM and produces approximately 33 horsepower. The fuel system utilizes a Zenith K5 carburetor, and the engine is protected by an oil bath air cleaner. Cooling is managed by a system with a 34.1-liter capacity, and the engine is started via a manual hand-crank mechanism.
Transmission and Drivetrain
The F-30 features a two-wheel drive configuration. Its transmission is an unsynchronized gear system providing four forward speeds and one reverse speed. Power is transferred through a dry disc clutch. The tractor is equipped with a rear power take-off (PTO) operating at 540 RPM with a 1.375-inch shaft, allowing for the operation of various towed implements.
Dimensions and Mechanical Build
The tractor has a total length of 147 inches (373 cm), a width of 90 inches (228 cm), and a height of 81 inches (205 cm). It weighs 5300 lbs (2404 kg). The machine is built with an open operator station and utilizes manual steering. It is fitted with agricultural steel tires, measuring 25x4 inches at the front and 42x12 inches at the rear, reflecting the standard agricultural hardware of the era.
Conclusion
The International Harvester F-30 was designed as a reliable row-crop tractor for mid-1930s agricultural operations. Its robust mechanical construction and 33-horsepower output made it a versatile machine for pulling and powering various field implements, cementing its role in the evolution of mechanized farming.
Production Information of Farmall, F-30
- Row-Crop tractor
- Built in Rock Island, Illinois, USA
| Manufacturer | Farmall (a part of International Harvester) |
|---|---|
| Total built | 28,902 |
Dimension and Tires Information of Farmall, F-30
| Length | 147 inches [373 cm] |
|---|---|
| Weight | 5300 lbs [2404 kg] |
| Width | 90 inches [228 cm] |
| Height | 81 inches [205 cm] |
| Ag front | 25x4 (steel) |
|---|---|
| Ag rear | 42x12 (steel) |
Engine Specifications of Farmall, F-30
- International Harvester
- Liquid-cooled vertical I-head
- Distillate
- 4-cylinder
| Coolant capacity | 36 qts [34.1 L] |
|---|---|
| Displacement | 283.7 ci [4.6 L] |
| Air cleaner | Oil bath |
| Bore/Stroke | 4.25x5.00 inches [108 x 127 mm] |
| Starter type | Hand-crank |
| Rated RPM | 1150 |
| Fuel system | Zenith K5 carburetor |
Transmission Information of Farmall, F-30
Transmission variants 1
| Type | Unsynchronized gear |
|---|---|
| Gears | 4 forward and 1 reverse |
| Clutch | Dry disc |
Mechanical Specs of Farmall, F-30
- Two-wheel drive
- Open operator station.
| Steering | Manual |
|---|
Power Information of Farmall, F-30
| Rear PTO Type | 540 (1.375) |
|---|
Where it sits
With 33 hp[B] HP, the Farmall F-30 sits between F-20 (29 HP) and M (38 HP) in Farmall's range. Its power puts it in the 49th percentile of 1930s models in our database (235 machines).
Frequently asked questions
How much horsepower does the Farmall F-30 have?
The Farmall F-30 delivers 33 hp[B] HP.
What years was the Farmall F-30 produced?
The Farmall F-30 was produced in 1931-1939.
What engine does the Farmall F-30 have?
The Farmall F-30 is powered by a 4-cylinder engine.
What transmission does the Farmall F-30 use?
The Farmall F-30 uses a Unsynchronized gear transmission.
How much does the Farmall F-30 weigh?
The Farmall F-30 weighs 5300 lbs [2404 kg].
Is the Farmall F-30 4WD?
The Farmall F-30 is available in 2WD.