Introduction
Production Information of Farmall, H
The production information of the tractor (H) includes details about its manufacturing.
| Original price was $2,000 in 1953 |
| Row-Crop tractor |
| The Farmall H is the row-crop version of the McCormick-Deering W-4. |
| Built in Rock Island, Illinois, USA |
| Manufacturer | Farmall (a part of International Harvester) |
|---|---|
| Total built | 391,227 |
Dimension and Tires Information of Farmall, H
This section sums up the dimension and tires information of the tractor.
| Front tread | 8.1 inches [20 cm] |
|---|---|
| Wheelbase | 88.325 inches [224 cm] |
| Height (steering wheel) | 74 inches [187 cm] |
| 100 inches (long-axle) [254 cm] | |
| Length | 125.25 inches [318 cm] |
| Rear tread | 44 to 80 inches [111 to 203 cm] |
| Weight | 3875 lbs [1757 kg] |
| Width | 75.5 inches [191 cm] |
| 10-38 | |
| Ag front | 5.50-16 |
| 8-38 | |
| 6.00-36 | |
| 6-16 | |
| Ag front | 6x20 (HV) |
| 9-38 | |
| Ag rear | 51x6 (steel) |
Engine Specifications of Farmall, H
Get the specifications for the engine and if different options are available.
| International Harvester |
| Liquid-cooled |
| Kerosene |
| 4-cylinder |
| Point gap | 0.013 inches [0.330 mm] |
|---|---|
| Sparkplug gap | 0.025 inches [0.635 mm] |
| Firing order | 1-3-4-2 |
| Intake valve clearance | 0.017 inches*Hot [0.432 mm] |
| Coolant capacity | 16.5 qts [15.6 L] |
| Electric OptOptional | |
| Oil capacity | 6 qts [5.7 L] |
| Displacement | 152.1 ci [2.5 L] |
| Compression | 4.5:1 |
| Bore/Stroke | 3.375x4.25 inches [86 x 108 mm] |
| Coolant capacity | 16.5 qts [15.6 L] |
| Exhaust valve clearance | 0.017 inches*Hot [0.432 mm] |
| Oil capacity | 6 qts [5.7 L] |
| Starter volts | 6 |
Transmission Information of Farmall, HY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Sliding gear |
|---|---|
| Oil capacity | 24 qts [22.7 L] |
| Gears | 5 forward and 1 reverse |
| Clutch | Dry disc |
Mechanical Specs of Farmall, HY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Manual steering |
| Mechanical contracting band brakes |
Power Information of Farmall, HY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540 *The 1-3/8 shaft was adopted in 1942. Prior to that, a 1-1/8 inch shaft was used. |
|---|
Hydraulics Specifications of Farmall, H
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center OptOptional |
|---|---|
| Capacity | 1 gal [3.8 L] |
Three-Point Hitch of Farmall, H
Hitch category and rear/front lift capacity.
| Type | Lift-All *Hydraulic implement lift system. |
|---|
Electrical System of Farmall, H
Battery voltage, charging system and ground.
| Ground | Positive |
|---|---|
| Charging system | Generator |
| Battery volts | 6 |
Frequently asked questions
How much horsepower does the Farmall H have?
The Farmall H delivers 26 hp[B] HP.
What years was the Farmall H produced?
The Farmall H was produced in 1939-1953.
What engine does the Farmall H have?
The Farmall H is powered by a 4-cylinder engine.
What transmission does the Farmall H use?
The Farmall H uses a Sliding gear transmission.
How much does the Farmall H weigh?
The Farmall H weighs 3875 lbs [1757 kg].
Is the Farmall H 4WD?
The Farmall H is available in 2WD.