Introduction
Production Information of Fendt, Farmer 280P
The production information of the tractor (Farmer 280P) includes details about its manufacturing.
| Manufacturer | Fendt |
|---|
Dimension and Tires Information of Fendt, Farmer 280P
This section sums up the dimension and tires information of the tractor.
| Rear tread | 50.7 inches [128 cm] |
|---|---|
| Wheelbase | 85.8 inches [217 cm] |
| Height (cab) | 89 inches [226 cm] |
| Height (ROPS) | 88.4 inches [224 cm] |
| Length | 144.3 inches [366 cm] |
| 2WD Front tread | 48.8 inches [123 cm] |
| 2WD Ground clearance | 13.9 inches [35 cm] |
| Width | 65.6 inches [166 cm] |
| Wide Rear tread | 58.6 inches [148 cm] |
| Wide Front tread | 58.8 inches [149 cm] |
| 4WD Front tread | 47.7 inches [121 cm] |
| 4WD Ground clearance | 10.1 inches [25 cm] |
| Standard tires (ag) | Front: 275/70-18. Rear: 14.9-28 |
|---|
Engine Specifications of Fendt, Farmer 280P
Get the specifications for the engine and if different options are available.
| KHD F4L913 |
| Air-cooled |
| Diesel |
| 4-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 249.3 ci [4.1 L] |
| Rated RPM | 2400 |
| Bore/Stroke | 4.02x4.92 inches [102 x 125 mm] |
| Starter volts | 12 |
| Torque RPM | 1500 |
| Torque | 200.6 lb-ft [272.0 Nm] |
| Power | 79.1 hp [59.0 kW] |
Transmission Information of Fendt, Farmer 280PY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Gears | 21 forward and 6 reverse |
|---|
Transmission variants 2
| Gears | 21 forward and reverse |
|---|
Mechanical Specs of Fendt, Farmer 280PY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Two-post mid-mount folding ROPS. Cab available with heat and air-conditioning. |
| Power steering |
| Hydraulic drum brakes |
Power Information of Fendt, Farmer 280PY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/750 |
| 540/750/1000 OptOptional |
Hydraulics Specifications of Fendt, Farmer 280P
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 2611 psi [180.0 bar] |
|---|---|
| Total flow | 18.2 gpm [68.9 lpm] |
Electrical System of Fendt, Farmer 280P
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging volts | 14 |
| Charging system | Alternator |
| Battery AH | 88 |
| Charging amps | 55 |
Frequently asked questions
How much horsepower does the Fendt Farmer 280P have?
The Fendt Farmer 280P delivers 79 HP.
What years was the Fendt Farmer 280P produced?
The Fendt Farmer 280P was produced in 1987-2002.
What engine does the Fendt Farmer 280P have?
The Fendt Farmer 280P is powered by a Diesel, 4-cylinder engine.
Is the Fendt Farmer 280P 4WD?
The Fendt Farmer 280P is available in 2WD/4WD.