Fendt Farmer 280S tractor

Fendt Farmer 280S

Power

79 hp

Production

1996-2002

Engine

Diesel, 4-cylinder

Drive

4WD

From the same series:

Farmer 275S

Introduction

Production Information of Fendt, Farmer 280S

The production information of the tractor (Farmer 280S) includes details about its manufacturing.

Row-Crop tractor
ManufacturerFendt

Dimension and Tires Information of Fendt, Farmer 280S

This section sums up the dimension and tires information of the tractor.

Rear tread59.1 inches [150 cm]
Wheelbase85.8 inches [217 cm]
Ground clearance13.1 inches [33 cm]
Height (cab)92.5 inches [234 cm]
Length143.1 inches [363 cm]
Rear tread50.4 to 70.1 inches [128 to 178 cm]
Front tread59.1 inches [150 cm]
Width74 inches [187 cm]
Standard tires (ag)Front: 12.4R20. Rear: 16.9R30

Engine Specifications of Fendt, Farmer 280S

Get the specifications for the engine and if different options are available.

KHD F4L913
Air-cooled
Diesel
4-cylinder
Torque RPM1550
Displacement249.3 ci [4.1 L]
Fuel systemDirect injection
Bore/Stroke4.02x4.92 inches [102 x 125 mm]
Starter volts12
StarterElectric
Torque200.6 lb-ft [272.0 Nm]
Rated RPM2300
Power79.1 hp [59.0 kW]

Transmission Information of Fendt, Farmer 280SY

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Gearshift with three gears (1-3), plus reverse (R), and three overdrive gears (25, 30, and 40 kph). Triple range gear split provides three speeds for each of the non-overdrive gears. Low and high ranges. Transmission also available with addition super-creeper range providing 30 gears forward and 9 reverse.
Gears21 forward and 6 reverse

Transmission variants 2

TypeShuttle
Gears21 forward and reverse
21-speed
21-speed shuttle

Mechanical Specs of Fendt, Farmer 280SY

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Cab standard with heat. Air-conditioning optional.
Power steering
Hydraulic drum brakes

Power Information of Fendt, Farmer 280SY

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Rear PTO Type540/750/1000
Front PTO Type1000

Hydraulics Specifications of Fendt, Farmer 280S

Hydraulic system type, pressure, pump flow and valves.

Pressure2611 psi [180.0 bar]
Pump flow10.8 gpm [40.9 lpm]

Three-Point Hitch of Fendt, Farmer 280S

Hitch category and rear/front lift capacity.

Rear lift6151 lbs [2790 kg]

Electrical System of Fendt, Farmer 280S

Battery voltage, charging system and ground.

Charging systemAlternator
Battery AH88
Battery volts12
Charging amps55
Charging volts14

Frequently asked questions

How much horsepower does the Fendt Farmer 280S have?

The Fendt Farmer 280S delivers 79 HP.

What years was the Fendt Farmer 280S produced?

The Fendt Farmer 280S was produced in 1996-2002.

What engine does the Fendt Farmer 280S have?

The Fendt Farmer 280S is powered by a Diesel, 4-cylinder engine.

Is the Fendt Farmer 280S 4WD?

The Fendt Farmer 280S is available in 4WD.

Compare the Fendt Farmer 280S with another model