Introduction
Production Information of Ferguson, F-40
The production information of the tractor (F-40) includes details about its manufacturing.
| The Ferguson F-40 is the same as the Massey Harris 50. The tractor was introduced during the dual line policy when the Massey-Harris-Ferguson company maintained separate Ferguson and Massey-Harris tractor lines. The F-40 was available as utility (S), single (T) or two-wheel (R) row-crop, and high-clearance (C) configurations. |
| Utility tractor |
| Built in Detroit, Michigan, USA |
| Manufacturer | Ferguson |
|---|
Dimension and Tires Information of Ferguson, F-40
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Wheelbase | 81.3 inches [206 cm] |
|---|---|
| Ballasted weight | 5461 lbs [2477 kg] |
| Operating weight | 3419 lbs [1550 kg] |
| Length | 120 inches [304 cm] |
| Front tread | 48 to 80 inches [121 to 203 cm] |
| Clearance (front axle) | 20.3 inches [51 cm] |
| Height | 56.8 inches [144 cm] |
| Rear tread | 48 to 76 inches [121 to 193 cm] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 11-28 |
Engine Specifications of Ferguson, F-40
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 4-cylinder |
| Exhaust valve clearance | 0.015 inches (cold) [0.381 mm] |
|---|---|
| Intake valve clearance | 0.015 inches (cold) [0.381 mm] |
| Compression | 6.6:1 |
| Starter volts | 12 |
| Idle RPM | 400-2200 |
| Displacement | 134 ci [2.2 L] |
| Oil capacity | 5 qts [4.7 L] |
| Air cleaner | Oil bath |
| Rated RPM | 2000 |
| Bore/Stroke | 3.3125x3.875 inches [84 x 98 mm] |
| Point gap | 0.022 inches [0.559 mm] |
| Sparkplug gap | 0.025 inches [0.635 mm] |
| Coolant capacity | 10 qts [9.5 L] |
Transmission Information of Ferguson, F-40Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears, plus reverse, in two ranges. |
| 50oF [10oC]↓ | : SAE 80 GL1 |
|---|---|
| Type | Unsynchronized gear |
| Oil type | 50oF [10oC]↑ : SAE 90 GL1 50oF [10oC]↓ : SAE 80 GL1 |
| Oil capacity | 32 qts [30.3 L] |
| Gears | 6 forward and 2 reverse |
| 50oF [10oC]↑ | : SAE 90 GL1 |
| Clutch | Dry disc |
Mechanical Specs of Ferguson, F-40Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Differential mechanical shoe brakes |
| Steering | Manual |
|---|---|
| Steering | Power OptOptional |
Power Information of Ferguson, F-40Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Live |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Ferguson, F-40
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering cap. | 1.6 qts [1.5 L] |
| Steering flow | 4 gpm [15.1 lpm] |
| Capacity | 8 gal [30.3 L] |
| Pressure | 1900 psi [131.0 bar] |
Three-Point Hitch of Ferguson, F-40
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|
Electrical System of Ferguson, F-40
Battery voltage, charging system and ground.
| Charging system | Generator |
|---|---|
| Battery AH | 50 |
| Charging amps | 10 |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Ferguson F-40 have?
The Ferguson F-40 delivers 36 hp[B] HP.
What years was the Ferguson F-40 produced?
The Ferguson F-40 was produced in 1956-1957.
What engine does the Ferguson F-40 have?
The Ferguson F-40 is powered by a 4-cylinder engine.
What transmission does the Ferguson F-40 use?
The Ferguson F-40 uses a Unsynchronized gear transmission.
How much does the Ferguson F-40 weigh?
The Ferguson F-40 weighs 3419 lbs [1550 kg].
Is the Ferguson F-40 4WD?
The Ferguson F-40 is available in 2WD.