Introduction
Ferguson TE-20 Utility Tractor
The Ferguson TE-20 is a utility tractor produced in Coventry, England, between 1946 and 1948. It is a historically significant model known for its role in post-war agricultural mechanization and served as the foundation for the subsequent TEA-20 series.
Engine and Performance
The tractor is powered by a 2.0-liter, 4-cylinder, liquid-cooled vertical I-head engine. It operates at a rated speed of 1750 RPM, delivering 28 horsepower. The engine requires 5.7 liters of oil and utilizes an oil bath air cleaner for filtration. Fuel consumption is approximately 8.6 liters per hour under load.
Transmission and PTO
The drivetrain features an unsynchronized gear transmission providing 4 forward speeds and 1 reverse speed. Power is delivered to implements via a transmission-driven rear power take-off (PTO) operating at 540 RPM.
Mechanical and Electrical Systems
The TE-20 utilizes a two-wheel drive configuration with manual steering. Braking is handled by differential mechanical expanding shoe brakes. The electrical system is powered by a 6-volt battery, supported by a Lucas generator for charging.
Dimensions and Operator Station
The tractor features an open operator station equipped with a pressed steel seat. It has a wheelbase of 177 cm and a total length of 292 cm. With an operating weight of 1,251 kg, which can be increased to 2,045 kg with ballast, it utilizes 6.00-16 front tires and 11-28 rear agricultural tires.
Conclusion
With over 172,000 units produced, the Ferguson TE-20 remains a foundational machine in agricultural history. Its simple mechanical design and standard utility features make it a representative example of mid-20th-century tractor engineering, suitable for light field tasks and historical preservation.
Videos
Production Information of Ferguson, TE-20
- In 1947 the Standard engine replaced the Continental engine in the TE20, this modified version was named the TEA20.
- Utility tractor
- Built in Coventry, England
| Manufacturer | Ferguson |
|---|---|
| Total built | 172,185 |
Dimension and Tires Information of Ferguson, TE-20
| Wheelbase | 70 inches [177 cm] |
|---|---|
| Operating weight | 2,760 lbs [1251 kg] |
| Height | 52 inches [132 cm] |
| Length | 115 inches [292 cm] |
| Ballasted weight | 4,510 lbs [2045 kg] |
| Width | 63.5 inches [161 cm] |
| Ag front | 6.00-16 |
|---|---|
| Ag rear | 11-28 |
Engine Specifications of Ferguson, TE-20
- Liquid-cooled vertical I-head
- 4-cylinder
| Fuel use | 2.27 gal/hour [8.6 l/hour] |
|---|---|
| Displacement | 120 ci [2.0 L] |
| Oil capacity | 6 qts [5.7 L] |
| Air cleaner | Oil bath |
| Bore/Stroke | 3.19x3.75 inches [81 x 95 mm] |
| Starter volts | 6 |
| Rated RPM | 1750 |
Transmission Information of Ferguson, TE-20
Transmission variants 1
| Type | Unsynchronized gear |
|---|---|
| Gears | 4 forward and 1 reverse |
Mechanical Specs of Ferguson, TE-20
- Two-wheel drive
- Open operator station with pressed steel seat.
- Differential mechanical expanding shoe brakes
| Steering | Manual |
|---|
Power Information of Ferguson, TE-20
| Rear PTO | Transmission |
|---|---|
| Rear PTO Type | 540 (1.125) |
Electrical System of Ferguson, TE-20
| Ground | Positive |
|---|---|
| Charging system | Lucas generator |
| Battery volts | 6 |
Where it sits
With 28 hp[B] HP, the Ferguson TE-20 sits between A (20 HP) and FF 30 (30 HP) in Ferguson's range. Its power puts it in the 39th percentile of 1940s models in our database (263 machines).
Frequently asked questions
How much horsepower does the Ferguson TE-20 have?
The Ferguson TE-20 delivers 28 hp[B] HP.
What years was the Ferguson TE-20 produced?
The Ferguson TE-20 was produced in 1946-1948.
What engine does the Ferguson TE-20 have?
The Ferguson TE-20 is powered by a 4-cylinder engine.
What transmission does the Ferguson TE-20 use?
The Ferguson TE-20 uses a Unsynchronized gear transmission.
How much does the Ferguson TE-20 weigh?
The Ferguson TE-20 weighs 2,760 lbs [1251 kg].
Is the Ferguson TE-20 4WD?
The Ferguson TE-20 is available in 2WD.