Fiat M100
Power
100 hp
Production
1996-1999
Engine
6-cylinder
Transmission
Dual Command
Drive
2WD/4WD
From the same series:
Introduction
Fiat M100 Tractor
The Fiat M100 is a utility tractor produced between 1996 and 1999. Part of the M115 series, this machine was manufactured in England and offered as a versatile platform for diverse agricultural operations, featuring a 100 hp engine and configurable drivetrain options.
Engine and Performance
The tractor is powered by a 7.5-liter, 6-cylinder liquid-cooled engine, delivering a rated power of 100 hp (74.6 kW) at 2200 RPM. It features a compression ratio of 17.5:1 and utilizes a firing order of 1-5-3-6-2-4. The engine is supported by a 12-volt electrical system with a 900 CCA battery capacity.
Transmission and Drivetrain
The M100 offers three transmission configurations: the 23-speed Dual Command, the 17-speed Range Command (for 2WD), and the 18-speed Range Command (for 4WD). All versions utilize wet disc clutches. The 4WD model includes a MFWD (Mechanical Front Wheel Drive) option, with differential locks available for both front and rear axles with manual and automatic modes.
Hydraulics and Hitch
The hydraulic system is a closed-center load-sensing type, providing a pump flow of 26 gpm (98.4 lpm) at a pressure of 2755 psi (190 bar). It supports between 2 and 4 valves. The rear hitch is a Category II type, capable of a lift capacity of 8,500 lbs (3,855 kg) measured at 24 inches behind the lift point.
Dimensions and Operator Environment
The tractor is available in 2WD and 4WD configurations, with wheelbases of 108.3 inches and 107.2 inches respectively. Operator comfort is managed through a two-post ROPS structure, with an optional cab available. Steering is provided by a hydrostatic power system, and braking is handled by differential hydraulic wet disc brakes.
Conclusion
The Fiat M100 is a robust, mid-range agricultural tractor characterized by its flexible transmission options and significant hydraulic lift capacity. It is suited for farmers and collectors requiring a reliable 100 hp machine capable of handling heavy implements and varied field conditions.
Production Information of Fiat, M100
- Built in England
| Manufacturer | Fiat |
|---|---|
| Original price | $44,000 (1999) |
Dimension and Tires Information of Fiat, M100
| Rear tread | 60.2 to 87.9 inches [152 to 223 cm (manual)] |
|---|---|
| Wheelbase | 108.3 inches (2WD) [275 cm] |
| Width | 84 inches (min) [213 cm] |
| Width(optional) | 182 inches (4WD) [462 cm] |
| Width(optional) | 107.2 inches (4WD) [272 cm] |
| Clearance (drawbar) | 15 inches [38 cm] |
| Clearance (front axle) | 23.1 inches (2WD) [58 cm] |
| Length | 180 inches (2WD) [457 cm] |
| Rear tread | 59.8 to 90.6 inches [151 to 230 cm (power)] |
| Front tread | 61.1 to 83.3 inches [155 to 211 cm (4WD)] |
| Front tread | 60.7 to 86.1 inches [154 to 218 cm (2WD)] |
| Front tread(optional) | 19 inches (4WD) [48 cm] |
| Standard tires (ag) | Front: 11.00-16. Rear: 18.4R38 (2WD) |
|---|---|
| Standard tires (ag)(optional) | Front: 14.9R28. Rear: 18.4R38 (4WD) |
Engine Specifications of Fiat, M100
- Liquid-cooled
- 6-cylinder
| Coolant capacity | 24.8 qts (ROPS) [23.5 L] |
|---|---|
| Starter power | 4.9 hp [3.7 kW] |
| Compression | 17.5:1 |
| Compression(optional) | 26.9 qts (cab) [25.5 L] |
| Idle RPM | 700-2420 |
| Operating RPM | 1500-2200 |
| Rated RPM | 2200 |
| Displacement | 456 ci [7.5 L] |
| Power | 100 hp [74.6 kW] |
| Oil capacity | 20 qts [18.9 L] |
| Bore/Stroke | 4.5x5.0 inches [114 x 127 mm] |
| Starter volts | 12 |
| Intake valve clearance | 0.016 inches (cold) [0.406 mm] |
| Exhaust valve clearance | 0.018 inches (cold) [0.457 mm] |
| Firing order | 1-5-3-6-2-4 |
| Torque RPM | 1400 |
Transmission Information of Fiat, M100
Transmission variants 1
- Four gears (1-4) in three ranges (A-C) with left-hand shuttle lever and push-button underdrive. Gear shifts may be made on the move with the clutch. The tractor must be stopped to shift range. The forward-reverse shuttle, and the push-button underdrive, may be performed on the move without the clutch. Reverse gears operate in underdrive only. Optional creeper doubles the available speeds to 46 forward and 24 reverse.
| Transmission | Dual Command |
|---|---|
| Oil capacity | 76.8 qts [72.7 L] |
| Clutch | Wet disc |
| Type | Partially synchronized |
| Gears | 23 forward and 12 reverse |
Transmission variants 2
- The 17-speed Range Command transmission was available with 2WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 30 forward and 12 in reverse.
| Transmission | Range Command |
|---|---|
| Oil capacity | 94.8 qts [89.7 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 17 forward and 6 reverse |
Transmission variants 3
- The 18-speed Range Command transmission was available with 4WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 31 and 12.
| Transmission | Range Command |
|---|---|
| Oil capacity | 94.8 qts [89.7 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 18 forward and 6 reverse |
- 23-speed partially synchronized
- 17-speed partial power shift
- 18-speed partial power shift
Mechanical Specs of Fiat, M100
- Differential hydraulic wet disc brakes
- Two-post ROPS. Optional cab.
| Drive | 4x2 2WD |
|---|---|
| Steering | Hydrostatic power |
| Steering(optional) | 4x4 MFWD 4WD (optional) |
| Differential lock | Rear or front and rear (4WD) with push-button operation. Manual and automatic modes. (2WD) |
Power Information of Fiat, M100
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of Fiat, M100
| Steering flow | 15.6 gpm [59.0 lpm] |
|---|---|
| Type | Closed center load sensing |
| Valves | 2 to 4 |
| Pressure | 2755 psi [190.0 bar] |
| Capacity | 23.7 gal (18-speed) [89.7 L] |
| Steering press. | 2465 psi [170.0 bar] |
| Pump flow | 26 gpm [98.4 lpm] |
| Pump flow(optional) | 19.2 gal (23-speed) [72.7 L] |
Three-Point Hitch of Fiat, M100
| Rear Type | II |
|---|---|
| Rear lift (at 24"/610mm) | 8,500 lbs [3855 kg] |
Electrical System of Fiat, M100
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Batteries | 2 |
| Batteries(optional) | 100 (with cab) |
| Charging system | Alternator |
| Battery CCA | 900 |
| Charging amps | 70 |
Where it sits
With 100 HP, the Fiat M100 sits just below M115 (115 HP) in Fiat's range. Its power puts it in the 69th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the Fiat M100 have?
The Fiat M100 delivers 100 HP.
What years was the Fiat M100 produced?
The Fiat M100 was produced in 1996-1999.
What engine does the Fiat M100 have?
The Fiat M100 is powered by a 6-cylinder engine.
What transmission does the Fiat M100 use?
The Fiat M100 uses a Dual Command transmission.
Is the Fiat M100 4WD?
The Fiat M100 is available in 2WD/4WD.