
Fiat M115
Power
115 hp
Production
1996-1999
Engine
6-cylinder
Transmission
Dual Command
Drive
2WD/4WD
From the same series:
Introduction
Production Information of Fiat, M115
The production information of the tractor (M115) includes details about its manufacturing.
| Built in England |
| Manufacturer | Fiat |
|---|---|
| Original price | $48,000 (1999) |
Dimension and Tires Information of Fiat, M115
This section sums up the dimension and tires information of the tractor.
| Rear tread | 60.2 to 87.9 inches [152 to 223 cm (manual)] |
|---|---|
| Wheelbase | 108.3 inches (2WD) [275 cm] |
| Width | 84 inches (min) [213 cm] |
| 182 inches (4WD) [462 cm] | |
| 107.2 inches (4WD) [272 cm] | |
| Clearance (drawbar) | 15 inches [38 cm] |
| Clearance (front axle) | 23.1 inches (2WD) [58 cm] |
| Length | 180 inches (2WD) [457 cm] |
| Rear tread | 59.8 to 90.6 inches [151 to 230 cm (power)] |
| Front tread | 61.1 to 83.3 inches [155 to 211 cm (4WD)] |
| Front tread | 60.7 to 86.1 inches [154 to 218 cm (2WD)] |
| 19 inches (4WD) [48 cm] |
| Standard tires (ag) | Front: 11.00-16. Rear: 18.4R38 (2WD) |
|---|---|
| Front: 14.9R28. Rear: 18.4R38 (4WD) |
Engine Specifications of Fiat, M115
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 6-cylinder |
| Coolant capacity | 24.8 qts (ROPS) [23.5 L] |
|---|---|
| Starter power | 4.9 hp [3.7 kW] |
| Compression | 17.5:1 |
| 26.9 qts (cab) [25.5 L] | |
| Idle RPM | 700-2420 |
| Operating RPM | 1500-2200 |
| Rated RPM | 2200 |
| Displacement | 456 ci [7.5 L] |
| Power | 115 hp [85.8 kW] |
| Oil capacity | 20 qts [18.9 L] |
| Bore/Stroke | 4.5x5.0 inches [114 x 127 mm] |
| Starter volts | 12 |
| Intake valve clearance | 0.016 inches (cold) [0.406 mm] |
| Exhaust valve clearance | 0.018 inches (cold) [0.457 mm] |
| Firing order | 1-5-3-6-2-4 |
| Torque RPM | 1600 |
Transmission Information of Fiat, M115Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in three ranges (A-C) with left-hand shuttle lever and push-button underdrive. Gear shifts may be made on the move with the clutch. The tractor must be stopped to shift range. The forward-reverse shuttle, and the push-button underdrive, may be performed on the move without the clutch. Reverse gears operate in underdrive only. Optional creeper doubles the available speeds to 46 forward and 24 reverse. |
| Transmission | Dual Command |
|---|---|
| Oil capacity | 76.8 qts [72.7 L] |
| Clutch | Wet disc |
| Type | Partially synchronized |
| Gears | 23 forward and 12 reverse |
Transmission variants 2
| The 17-speed Range Command transmission was available with 2WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 30 forward and 12 in reverse. |
| Transmission | Range Command |
|---|---|
| Oil capacity | 94.8 qts [89.7 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 17 forward and 6 reverse |
Transmission variants 3
| The 18-speed Range Command transmission was available with 4WD. Six gears (1-6) in three ranges (A-C) with left-hand shuttle lever. Push-button gear shifting on the move. To shift ranges, hold up or down gear shift button while pressing range shift button. Reverse is available in range B only. Optional creeper increases available speeds to 31 and 12. |
| Transmission | Range Command |
|---|---|
| Oil capacity | 94.8 qts [89.7 L] |
| Clutch | Wet disc |
| Type | Partial power shift |
| Gears | 18 forward and 6 reverse |
| 23-speed partially synchronized |
| 17-speed partial power shift |
| 18-speed partial power shift |
Mechanical Specs of Fiat, M115Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Differential hydraulic wet disc brakes |
| Two-post ROPS. Optional cab. |
| Drive | 4x2 2WD |
|---|---|
| Steering | Hydrostatic power |
| 4x4 MFWD 4WD (optional) | |
| Differential lock | Rear or front and rear (4WD) with push-button operation. Manual and automatic modes. (2WD) |
Power Information of Fiat, M115Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of Fiat, M115
Hydraulic system type, pressure, pump flow and valves.
| Steering flow | 15.6 gpm [59.0 lpm] |
|---|---|
| Type | Closed center load sensing |
| Valves | 2 to 4 |
| Pressure | 2755 psi [190.0 bar] |
| Capacity | 23.7 gal (18-speed) [89.7 L] |
| Steering press. | 2465 psi [170.0 bar] |
| Pump flow | 26 gpm [98.4 lpm] |
| 19.2 gal (23-speed) [72.7 L] |
Three-Point Hitch of Fiat, M115
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Rear lift (at 24"/610mm) | 8,500 lbs [3855 kg] |
Electrical System of Fiat, M115
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Batteries | 2 |
| 100 (with cab) | |
| Charging system | Alternator |
| Battery CCA | 900 |
| Charging amps | 70 |
Frequently asked questions
How much horsepower does the Fiat M115 have?
The Fiat M115 delivers 115 HP.
What years was the Fiat M115 produced?
The Fiat M115 was produced in 1996-1999.
What engine does the Fiat M115 have?
The Fiat M115 is powered by a 6-cylinder engine.
What transmission does the Fiat M115 use?
The Fiat M115 uses a Dual Command transmission.
Is the Fiat M115 4WD?
The Fiat M115 is available in 2WD/4WD.