Introduction
Production Information of Ford-New Holland, 2810
The production information of the tractor (2810) includes details about its manufacturing.
| Utility tractor |
| Original price was $16,000 in 1990 |
| Manufacturer | Ford-New Holland |
|---|
Dimension and Tires Information of Ford-New Holland, 2810
This section sums up the dimension and tires information of the tractor.
| 4WD Front tread | 56 to 72 inches [142 to 182 cm] |
|---|---|
| 2WD Wheelbase | 77.5 inches [196 cm] |
| 2WD Operating weight | 4420 lbs [2004 kg] |
| Width | 68.4 inches [173 cm] |
| 4WD Wheelbase | 84.1 inches [213 cm] |
| 4WD Clearance (front axle) | 13.1 inches [33 cm] |
| 4WD Operating weight | 4995 lbs [2265 kg] |
| Length | 127.2 inches [323 cm] |
| Rear tread | 56 to 80 inches [142 to 203 cm] |
| 2WD Front tread | 52 to 80 inches [132 to 203 cm] |
| Clearance (rear axle) | 20.5 inches [52 cm] |
| 2WD Clearance (front axle) | 21.5 inches [54 cm] |
| 2WD Standard tires (ag) | Front: 6.00-16. Rear: 13.6-28 |
|---|---|
| 4WD Standard tires (ag) | Front: 8.3-24. Rear: 13.6-28 |
Engine Specifications of Ford-New Holland, 2810
Get the specifications for the engine and if different options are available.
| Ford |
| Liquid-cooled |
| 3-cylinder |
| Diesel |
| Coolant capacity | 11 qts [10.4 L] |
|---|---|
| Oil capacity | 7 qts [6.6 L] |
| Power (gross) | 36.5 hp [27.2 kW] |
| Rated RPM | 2000 |
| Compression | 17.3:1 |
| Displacement | 158 ci [2.6 L] |
| Power | 34.3 hp [25.6 kW] |
| Air cleaner | Dual paper elements |
| Bore/Stroke | 4.20x3.80 inches [107 x 97 mm] |
| Starter volts | 12 |
| Torque RPM | 1400 |
| Torque | 101 lb-ft [137.0 Nm] |
Transmission Information of Ford-New Holland, 2810Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Dual Range |
|---|---|
| Oil capacity | 12.7 qts [12.0 L] |
| Gears | 8 forward and 2 reverse |
| Clutch | 330mm dry disc |
Transmission variants 2
| Type | Mechanical shuttle |
|---|---|
| Gears | 6 forward and 4 reverse |
| 8-speed |
| 6-speed mechanical shuttle |
Mechanical Specs of Ford-New Holland, 2810Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-post fixed ROPS. |
| Two- or four-wheel drive |
| Differential wet disc brakes |
| Power assist OptOptional | |
| Steering | Manual |
| Final drives | Inboard planetary |
| Differential lock | Mechanical rear |
Power Information of Ford-New Holland, 2810Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
| Engine RPM | 540@1800 |
Hydraulics Specifications of Ford-New Holland, 2810
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering cap. | 3.6 qts [3.4 L] |
| Pump flow | 7.7 gpm [29.1 lpm] |
| Capacity | 12.1 gal [45.8 L] |
| Pressure | 2500 psi [172.4 bar] |
Three-Point Hitch of Ford-New Holland, 2810
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position and draft control |
| Rear lift | 2936 lbs [1331 kg] |
Electrical System of Ford-New Holland, 2810
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Mk II Charging amps | 51 |
| Charging system | Alternator |
| Battery AH | 51 |
| Mk I Charging amps | 32 |
Frequently asked questions
How much horsepower does the Ford-New Holland 2810 have?
The Ford-New Holland 2810 delivers 34 HP.
What years was the Ford-New Holland 2810 produced?
The Ford-New Holland 2810 was produced in 1983-1990.
What engine does the Ford-New Holland 2810 have?
The Ford-New Holland 2810 is powered by a Diesel, 3-cylinder engine.
What transmission does the Ford-New Holland 2810 use?
The Ford-New Holland 2810 uses a Dual Range transmission.
How much does the Ford-New Holland 2810 weigh?
The Ford-New Holland 2810 weighs 4420 lbs [2004 kg].
Is the Ford-New Holland 2810 4WD?
The Ford-New Holland 2810 is available in 2WD/4WD.