Introduction
Production Information of Ford, 2910
The production information of the tractor (2910) includes details about its manufacturing.
| Utility tractor |
| Original price was $16,000 in 1989 |
| Manufacturer | Ford |
|---|
Dimension and Tires Information of Ford, 2910
This section sums up the dimension and tires information of the tractor.
| Clearance (rear axle) | 20.5 inches [52 cm] |
|---|---|
| 2WD Wheelbase | 77.5 inches [196 cm] |
| 2WD Clearance (front axle) | 21.5 inches [54 cm] |
| Width | 68.4 inches [173 cm] |
| 4WD Wheelbase | 84.1 inches [213 cm] |
| 2WD Front tread | 52 to 80 inches [132 to 203 cm] |
| 4WD Clearance (front axle) | 13.1 inches [33 cm] |
| Length | 127.2 inches [323 cm] |
| Rear tread | 56 to 80 inches [142 to 203 cm] |
| 4WD Front tread | 56 to 72 inches [142 to 182 cm] |
| Ag front | 5.50-16 (2WD) |
|---|---|
| Ag rear | 16.9-24 |
| Ag front | 6.00-16 (2WD) |
| 8.3-24 (4WD) | |
| 13.6-28 | |
| Ag rear | 12.4-28 |
Engine Specifications of Ford, 2910
Get the specifications for the engine and if different options are available.
| Ford |
| Liquid-cooled |
| 3-cylinder |
| Diesel |
| Coolant capacity | 11 qts [10.4 L] |
|---|---|
| Oil capacity | 7 qts [6.6 L] |
| Power (gross) | 44 hp [32.8 kW] |
| Rated RPM | 2000 |
| Compression | 17.3:1 |
| Displacement | 175 ci [2.9 L] |
| Power | 40.5 hp [30.2 kW] |
| Air cleaner | Dry |
| Bore/Stroke | 4.2x4.2 inches [107 x 107 mm] |
| Starter volts | 12 |
| Torque RPM | 1400 |
| Torque | 118 lb-ft [160.0 Nm] |
Transmission Information of Ford, 2910Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Dual Range |
|---|---|
| Oil capacity | 12.7 qts [12.0 L] |
| Gears | 8 forward and 2 reverse |
| Clutch | 330mm dry disc |
Transmission variants 2
| Type | Synchromesh |
|---|---|
| Gears | 8 forward and 4 reverse |
| Oil capacity | 9.9 qts [9.4 L] |
Transmission variants 3
| Type | Mechanical shuttle |
|---|---|
| Gears | 6 forward and 4 reverse |
| 8-speed |
| 8-speed synchromesh |
| 6-speed mechanical shuttle |
Mechanical Specs of Ford, 2910Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Differential wet disc brakes |
| Two-post fixed ROPS. Cab optional. |
| Steering | Power assist |
|---|---|
| Final drives | Inboard planetary |
| Differential lock | Mechanical rear |
Power Information of Ford, 2910Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 |
| Engine RPM | 540@1800 |
Hydraulics Specifications of Ford, 2910
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| 12.8 gpmOptOptional [48.4 lpm] | |
| Pump flow | 7.7 gpm [29.1 lpm] |
| Capacity | 12.1 gal [45.8 L] |
| Steering flow | 3.6 gpm [13.6 lpm] |
| Pressure | 2500 psi [172.4 bar] |
Three-Point Hitch of Ford, 2910
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position and top-link draft control |
Electrical System of Ford, 2910
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Mk II Charging amps | 51 |
| Charging system | Alternator |
| Battery AH | 128 |
| Mk I Charging amps | 32 |
Frequently asked questions
How much horsepower does the Ford 2910 have?
The Ford 2910 delivers 40 HP.
What years was the Ford 2910 produced?
The Ford 2910 was produced in 1983-1989.
What engine does the Ford 2910 have?
The Ford 2910 is powered by a Diesel, 3-cylinder engine.
What transmission does the Ford 2910 use?
The Ford 2910 uses a Dual Range transmission.
Is the Ford 2910 4WD?
The Ford 2910 is available in 2WD/4WD.