Introduction
Production Information of Ford, 641
The production information of the tractor (641) includes details about its manufacturing.
| An orchard variant was also available, with a model number of 641-21. |
| Original price was $3,096 in 1961 |
| Utility tractor |
| Built in Highland Park, Michigan, USA |
| Manufacturer | Ford |
|---|
Dimension and Tires Information of Ford, 641
This section sums up the dimension and tires information of the tractor.
| Operating weight | 3291 lbs [1492 kg] |
|---|---|
| Rear tread | 52 to 76 inches [132 to 193 cm] |
| Ballasted weight | 5523 lbs [2505 kg] |
| Front tread | 52 to 80 inches [132 to 203 cm] |
| Ag front | 5.50-16 |
|---|---|
| Ag rear | 11-28 |
Engine Specifications of Ford, 641
Get the specifications for the engine and if different options are available.
| Ford EAE Red Tiger |
| Liquid-cooled vertical inline |
| LP gas |
| 4-cylinder 8-valve |
| Coolant capacity | 15 qts [14.2 L] |
|---|---|
| Starter volts | 6 |
| Rated RPM | 2200 |
| Sparkplug | 14MM |
| Starter volts | 6 |
| Firing order | 1-2-4-3 |
| Firing order | 1-2-4-3 |
| Displacement | 134 ci [2.2 L] |
| Compression | 7.5:1 |
| Bore/Stroke | 3.4375x3.60 inches [87 x 91 mm] |
| Firing order | 1-2-4-3 |
| Sparkplug gap | 0.025 inches (min) [0.635 mm] |
| 0.028 inches (max) [0.711 mm] | |
| Torque RPM | 1600 |
| Starter volts | 12 |
Transmission Information of Ford, 641Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| SAE 80 Mild EP | |
| Manufacturer | Ford |
| Oil capacity | 6 qts [5.7 L] |
| Clutch | 254mm dry disc |
| Type | Unsynchronized gear |
| Oil type | SAE 80 Mild EP |
| Gears | 4 forward and 1 reverse |
Transmission variants 2
| The 12-speed adds a mechanical over/under to the basic four-speed transmission. |
| Type | Unsynchronized gear |
|---|---|
| Gears | 12 forward and 3 reverse |
| Clutch | Dry disc |
| 4-speed unsynchronized gear |
| 12-speed unsynchronized gear |
Mechanical Specs of Ford, 641Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Differential mechanical expanding shoe brakes |
| Steering | Manual |
|---|---|
| Power assist optional |
Power Information of Ford, 641Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Ford, 641
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Capacity | 2 gal [7.6 L] |
| Total flow | 4 gpm [15.1 lpm] |
Three-Point Hitch of Ford, 641
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position and draft control |
| Rear lift | 1250 lbs [567 kg] |
Electrical System of Ford, 641
Battery voltage, charging system and ground.
| Battery AH | 80 (6V) |
|---|---|
| Ground | Positive (6V) |
| Battery volts | 6 (gas/lp) |
| Charging amps | 20 |
| Negative (12V) | |
| 135 (12V) | |
| 12 (diesel) | |
| Charging system | Generator |
Frequently asked questions
How much horsepower does the Ford 641 have?
The Ford 641 delivers 48 HP.
What years was the Ford 641 produced?
The Ford 641 was produced in 1957-1962.
What engine does the Ford 641 have?
The Ford 641 is powered by a LP gas, 4-cylinder 8-valve engine.
What transmission does the Ford 641 use?
The Ford 641 uses a Unsynchronized gear transmission.
How much does the Ford 641 weigh?
The Ford 641 weighs 3291 lbs [1492 kg].
Is the Ford 641 4WD?
The Ford 641 is available in 2WD.