Introduction
Production Information of Ford, 741
The production information of the tractor (741) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Highland Park, Michigan, USA |
| Manufacturer | Ford |
|---|
Dimension and Tires Information of Ford, 741
This section sums up the dimension and tires information of the tractor.
| Rear tread | 56 to 80 inches [142 to 203 cm] |
|---|---|
| Wheelbase | 85.3 inches [216 cm] |
| Ground clearance | 27.25 inches [69 cm] |
| Weight | 3400 lbs [1542 kg] |
| Length | 132.1 inches [335 cm] |
| Front tread | 8.3 to 16.3 inches [21 to 41 cm] |
| Height | 65.07 inches [165 cm] |
| Ag front | 5.50-16 |
|---|---|
| Ag rear | 11-28 |
| Ag front | 9.00-10 |
Engine Specifications of Ford, 741
Get the specifications for the engine and if different options are available.
| Ford |
| Liquid-cooled |
| Diesel |
| 4-cylinder 8-valve |
| Coolant capacity | 15 qts [14.2 L] |
|---|---|
| Starter volts | 6 |
| Firing order | 1-2-4-3 |
| Sparkplug | 14MM |
| Compression | 7.5:1 |
| Rated RPM | 2200 |
| Starter volts | 12 |
| Displacement | 144 ci [2.4 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 3.562x3.60 inches [90 x 91 mm] |
| Firing order | 1-2-4-3 |
| Sparkplug gap | 0.025 inches (min) [0.635 mm] |
| 0.028 inches (max) [0.711 mm] | |
| Torque RPM | 1600 |
| Torque | 126.8 lb-ft [171.9 Nm] |
Transmission Information of Ford, 741Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Ford |
|---|---|
| Clutch | 254mm dry disc |
| Type | Unsynchronized gear |
| Gears | 4 forward and 1 reverse |
Mechanical Specs of Ford, 741Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Differential mechanical expanding shoe brakes |
| Steering | Power assist |
|---|
Power Information of Ford, 741Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Ford, 741
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Capacity | 4 gal [15.1 L] |
Three-Point Hitch of Ford, 741
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Control | Position and draft control |
| Rear lift | 1250 lbs [567 kg] |
Electrical System of Ford, 741
Battery voltage, charging system and ground.
| Battery AH | 80 (6V) |
|---|---|
| Ground | Positive (6V) |
| Battery volts | 6 (gas/lp) |
| Charging amps | 20 |
| Negative (12V) | |
| 135 (12V) | |
| 12 (diesel) | |
| Charging system | Generator |
Frequently asked questions
How much horsepower does the Ford 741 have?
The Ford 741 delivers 48 HP.
What years was the Ford 741 produced?
The Ford 741 was produced in 1958-1962.
What engine does the Ford 741 have?
The Ford 741 is powered by a Diesel, 4-cylinder 8-valve engine.
What transmission does the Ford 741 use?
The Ford 741 uses a Ford transmission.
How much does the Ford 741 weigh?
The Ford 741 weighs 3400 lbs [1542 kg].
Is the Ford 741 4WD?
The Ford 741 is available in 2WD.