Ford 876
Power
280 hp
Production
1989-1993
Engine
Aftercooled turbocharged diesel, 6-cylinder
Transmission
Versatile
Drive
4WD
From the same series:
Introduction
Production Information of Ford, 876
The production information of the tractor (876) includes details about its manufacturing.
| Original price was $93,000 in 1993 |
| Four-wheel Drive (4WD) tractor |
| Built in Winnipeg, Manitoba, Canada |
| Manufacturer | Ford |
|---|
Dimension and Tires Information of Ford, 876
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Wheelbase | 130 inches [330 cm] |
|---|---|
| Front axle | Flange |
| Front axle | Bar: 4 inch diameter [101 mm] |
| Length | 260 inches [660 cm] |
| Bar rear axle | 4 inch diameter [101 mm] |
| Ground clearance | 16.1 inches [40 cm] |
| Ag rear | 18.4x38 |
|---|---|
| Ag front | 20.8x38 |
| 24.5x32 | |
| 18.4x42 | |
| Ag rear | 20.8x38 |
| 18.4x42 | |
| 30.5x32 | |
| Ag front | 18.4x38 |
| 30.5x32 | |
| 24.5x32 |
Engine Specifications of Ford, 876
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| Aftercooled turbocharged diesel |
| 6-cylinder |
| Oil capacity | 28 qts [26.5 L] |
|---|---|
| Starter volts | 12 |
| Air cleaner | Dual dry element |
| Coolant capacity | 56.5 qts [53.5 L] |
| Block heater | |
| Compression | 16:1 |
| Pre-heating | Ether injection |
| Displacement | 611 ci [10.0 L] |
| Power | 280 hp [208.8 kW] |
| Bore/Stroke | 4.921x5.354 inches [125 x 136 mm] |
| Torque RPM | 1300 |
| Torque | 895 lb-ft [1213.6 Nm] |
| Rated RPM | 2100 |
Transmission Information of Ford, 876Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Versatile |
|---|---|
| Oil capacity | 21.5 qts [20.3 L] |
| Clutch | 356mm dry disc |
| Type | Constant mesh |
| Gears | 12 forward and 4 reverse |
Transmission variants 2
| Type | Full power shift |
|---|---|
| Oil capacity | 18 qts [17.0 L] |
| Gears | 12 forward and 2 reverse |
| Clutch | 228mm wet disc |
| 12-speed constant mesh |
| 12-speed full power shift |
Mechanical Specs of Ford, 876Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Hydraulic disc brakes |
| Articulated power steering |
| Cab standard with air-conditioning. |
| Final drives | Outboard planetary |
|---|---|
| Inboard planetary (row-crop axle) |
Power Information of Ford, 876Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1.75) |
Hydraulics Specifications of Ford, 876
Hydraulic system type, pressure, pump flow and valves.
| Steering press. | 2300 psi [158.6 bar] |
|---|---|
| Type | Closed center load sensing *Steering pump is open center. |
| Pump flow | 25.2 gpm [95.4 lpm] |
| Valves | 4 to 5 |
| Capacity | 15.3 gal [57.9 L] |
| Steering flow | 25.9 gpm [98.0 lpm] |
| Pressure | 2250 psi [155.1 bar] |
Three-Point Hitch of Ford, 876
Hitch category and rear/front lift capacity.
| Rear Type | IVN/III |
|---|---|
| 13036 lbs (IV/III) [5913 kg] | |
| Control | Position control |
| Rear lift (at 24"/610mm) | 10313 lbs (III) [4677 kg] |
Electrical System of Ford, 876
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 625 |
| Batteries | 4 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 90 |
Frequently asked questions
How much horsepower does the Ford 876 have?
The Ford 876 delivers 280 HP.
What years was the Ford 876 produced?
The Ford 876 was produced in 1989-1993.
What engine does the Ford 876 have?
The Ford 876 is powered by a Aftercooled turbocharged diesel, 6-cylinder engine.
What transmission does the Ford 876 use?
The Ford 876 uses a Versatile transmission.
Is the Ford 876 4WD?
The Ford 876 is available in 4WD.