Introduction
Production Information of International Harvester, 140
The production information of the tractor (140) includes details about its manufacturing.
| The International 140 began as the industrial version of the Farmall 140. Industrial tractors had heavier front axles and foot-operated throttles, among other options. As the Farmall and International brands were merged the differences simply became options that the buyer could order. |
| Original price was $8,200 in 1979 |
| Manufacturer | International Harvester |
|---|---|
| Total built | 66,290 |
Dimension and Tires Information of International Harvester, 140
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 22.3 inches [56 cm] |
|---|---|
| Wheelbase | 71 inches [180 cm] |
| Shipping weight | 2700 lbs [1224 kg] |
| Height (steering wheel) | 65.5 inches [166 cm] |
| Length | 107 inches [271 cm] |
| Front tread | 40 to 58 inches [101 to 147 cm] |
| Operating weight | 3000 lbs [1360 kg] |
| Width | 56 inches [142 cm] |
| Rear tread | 40 to 68 inches [101 to 172 cm] |
| Ag front | 5.00-15 |
|---|---|
| Lawn/turf rear | 12.4-24 |
| Ag rear | 11.2-24 |
| Ag rear | 9.5-24 |
| Ag front | 6.00-16 |
Engine Specifications of International Harvester, 140
Get the specifications for the engine and if different options are available.
| International Harvester C-123 |
| Liquid-cooled vertical I-head |
| Gasoline |
| 4-cylinder |
| 12 (late) | |
| Starter volts | 6 (early) |
| Power (gross) | 28 hp [20.9 kW] |
| Oil capacity | 5 qts [4.7 L] |
| Compression | 6.94:1 |
| Rated RPM | 1400 |
| Air cleaner | Oil bath |
| Displacement | 122.7 ci [2.0 L] |
| Power (net) | 25 hp [18.6 kW] |
| Bore/Stroke | 3.125x4.00 inches [79 x 102 mm] |
| Firing order | 1-3-4-2 |
| Coolant capacity | 15 qts [14.2 L] |
| Torque RPM | 1400 |
| Torque | 106 lb-ft [143.7 Nm] |
Transmission Information of International Harvester, 140Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Sliding gear |
|---|---|
| Oil capacity | 5 qts [4.7 L] |
| Gears | 4 forward and 1 reverse |
| Clutch | Single 9-inch dry disc |
Mechanical Specs of International Harvester, 140Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Differential mechanical contracting band brakes |
| Steering | Manual worm-and-sector |
|---|
Power Information of International Harvester, 140Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Transmission |
|---|---|
| Rear PTO Type | 540 |
Hydraulics Specifications of International Harvester, 140
Hydraulic system type, pressure, pump flow and valves.
| Type | IH Touch-Control |
|---|---|
| Capacity | 3.38 gal [12.8 L] |
| Total flow | 4.6 gpm [17.4 lpm] |
Three-Point Hitch of International Harvester, 140
Hitch category and rear/front lift capacity.
| Type | IH Fast Hitch (one-point) |
|---|
Electrical System of International Harvester, 140
Battery voltage, charging system and ground.
| Ground | Positive (6V) |
|---|---|
| Battery volts | 6 (early) |
| Alternator (late) | |
| Negative (12V) | |
| 12 (late) | |
| Charging system | Generator (early) |
Frequently asked questions
How much horsepower does the International Harvester 140 have?
The International Harvester 140 delivers 28 HP.
What years was the International Harvester 140 produced?
The International Harvester 140 was produced in 1958-1979.
What engine does the International Harvester 140 have?
The International Harvester 140 is powered by a Gasoline, 4-cylinder engine.
What transmission does the International Harvester 140 use?
The International Harvester 140 uses a Sliding gear transmission.
How much does the International Harvester 140 weigh?
The International Harvester 140 weighs 3000 lbs [1360 kg].
Is the International Harvester 140 4WD?
The International Harvester 140 is available in 2WD.