Introduction
Production Information of International Harvester, 274
The production information of the tractor (274) includes details about its manufacturing.
| The IH 274 Offset was a 284 modified by the KIMCO corporation (Komatsu) of Japan. |
| High-Clearance tractor |
| Original price was $10,300 in 1983 |
| Manufacturer | International Harvester |
|---|
Dimension and Tires Information of International Harvester, 274
This section sums up the dimension and tires information of the tractor.
| Front tread | 44.9 to 64.4 inches [114 to 163 cm] |
|---|---|
| Wheelbase | 72.8 inches [184 cm] |
| Weight | 2,720 lbs [1233 kg] |
| Height (steering wheel) | 67.9 inches [172 cm] |
| Length | 109.4 inches [277 cm] |
| Rear tread | 44.5 to 64.6 inches [113 to 164 cm] |
| Ground clearance | 23 inches (frame) [58 cm] |
| Width | 57.9 inches [147 cm] |
| Ag front | 5.50-16 |
|---|---|
| Ag rear | 12.4-24 |
Engine Specifications of International Harvester, 274
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| Coolant capacity | 7.2 qts [6.8 L] |
|---|---|
| Displacement | 99 ci [1.6 L] |
| Oil capacity | 5.3 qts [5.0 L] |
| Rated RPM | 2600 |
| Bore/Stroke | 3.27x3.94 inches [83 x 100 mm] |
| Oil change | 100 h |
| Starter volts | 12 |
| Idle RPM | 600-2760 |
| Power | 30 hp [22.4 kW] |
Transmission Information of International Harvester, 274Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears, plus reverse, with high and low ranges. |
| Transmission | Sliding gear |
|---|---|
| Oil capacity | 13.6 qts [12.9 L] |
| Gears | 8 forward and 2 reverse |
| Clutch | 8.5-inch dry disc |
Mechanical Specs of International Harvester, 274Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Hydraulic disc brakes |
| Two-post ROPS. Optional canopy. |
Power Information of International Harvester, 274Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540 |
|---|---|
| Engine RPM | 540@2160 |
Hydraulics Specifications of International Harvester, 274
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 3.4 gal [12.9 L] |
|---|---|
| Pressure | 1857 psi [128.0 bar] |
| Pump flow | 5.7 gpm [21.6 lpm] |
Three-Point Hitch of International Harvester, 274
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|
Electrical System of International Harvester, 274
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the International Harvester 274 have?
The International Harvester 274 delivers 30 HP.
What years was the International Harvester 274 produced?
The International Harvester 274 was produced in 1979-1983.
What transmission does the International Harvester 274 use?
The International Harvester 274 uses a Sliding gear transmission.
How much does the International Harvester 274 weigh?
The International Harvester 274 weighs 2,720 lbs [1233 kg].
Is the International Harvester 274 4WD?
The International Harvester 274 is available in 2WD.